Place the rear jaw upside down on the inverted benchtop and measure how far the top of the jaw extends below the bottom. 14″ for a 7″ vise, 12″ for a 10″ vice (The former is required for the smaller vise.) Add enough to the cheek width to make it approximately 18″ above the bench surface when mounted.
How to choose the right bench vise for You?
Look for a bench vises with integrated pipe jaws. These extra jaws are located in the throat of the dynamic and static jaw and are serrated and curved specifically to hold pipes. Determining the max pipe diameter is important in determining the size of vise you will need.
What size of vise do I Need?
Vises are typically available in 4, 5, 6 & 8" sizes. These sizes refer to the width of the jaws. The larger and heavier the object to be held the larger the vise required. As a general rule of thumb, the maximum throat depth is typically proportionate to the jaw width.
What is a dynamic jaw on a bench vise?
Anatomy of a Bench Vise Sliding or Dynamic Jaw – the jaw closest to the operator that has the handle protruding through it. It is referred to as the dynamic jaw as it is the jaw that moves open and closed. The dynamic jaw applies or relieves clamping pressure.
What size vise is equivalent to a Bessey 6?
It has a maximum opening of 5.25″, a throat depth of 2.75″ and weighs 44lbs. So a “little” 3.5″ jaw vise is almost the match for the Bessey 6″ vise in every way except for jaw width.
How the size of bench vice is referred?
The size of the vice is stated by the width of the jaws. e.g. 150 mm parallel jaw bench vice.
How the size of vice is stated?
Explanation: The size of the engineer's vice is stated by the width of the jaws.eg. 150mm parallel jaw bench vice.
What size bench vise is best?
For general household DIY, a 4- to 5-inch vise is large enough to handle most tasks. (This measurement is the length of the jaws from end to end and is maximum amount of contact your vise has with the workpiece.)
What size is a number 3 vice?
3 Mechanics Vice 4in : Amazon.co.uk: DIY & Tools....Technical Details.ManufacturerAutoMotion Factors LimitedProduct Dimensions36.8 x 19.2 x 18.8 cm; 500 GramsItem model number3Size100mmColourGrey10 more rows
How can vice be specified?
A vise or vice (British English) is a mechanical apparatus used to secure an object to allow work to be performed on it. Vises have two parallel jaws, one fixed and the other movable, threaded in and out by a screw and lever.
What are the different bench vices?
The following are the types of vice:Bench Vice.Simple Bench Vice.Swivel Base Bench Vice.Quick Release Vice.Combination Vice.Machine Vice. Plain Machine Vice. Flange Machine Vice. Swivel Machine Vice. Universal Machine Vice. Vertical Machine Vice.Pipe Vice.Leg Vice.More items...•
Is a steel or cast iron vise better?
Cast-iron vises are also suitable to use as an anvil hammering surface. Steel vises are also popular, since they're strong and even more durable than cast iron. They can deform a bit under extreme pressure, however, and so they tend to be less expensive.
What is the best vise on the market?
Best Bench Vise: ReviewsTEKTON 4-Inch Swivel Bench Vise. ... Wilton 11106 Wilton Bench Vise. ... Forward DT08125A 5-Inch Heavy Duty Bench Vise. ... Olympia Tool Bench Vise. ... Yost Tools Bench Vise Tool. ... IRWIN Tools Multi-Purpose Bench Vise. ... Grizzly Industrial G7062-5″ Multi-Purpose Bench Vise. ... WEN MPV502 Multi-Purpose Bench Vise.More items...•
Are clamp on vises good?
As such, clamp-on vises are typically most useful for light duty operations. That's not to say that they can't take some abuse and some torque, but the upper limit just isn't as high as a traditional vise.
What size is a number 1 vice?
Irwin Record No. 1 Mechanics Vice 3.inMaterialHardened Steel,Metal,IronBrandRecordItem dimensions L x W x H27.9 x 26 x 6.5 centimetresColourGreyStyleSafety1 more row
What size is a record no 2 vice?
2 Engineers Vice - 3 1/2" - Sheffield Tooling Company....Product Details.BrandRecordJaw Width3 1/2″Jaw Opening3 1/2″Throat Depth2 1/4″ConditionUsed
What size is a record No 1 vice?
75mm1 3″ (75mm) Mechanics Vice 1ZR.
What are the 4 vices?
These are generally: the three Theological Virtues (Faith, Hope and Charity) and the four Cardinal Virtues (Prudence, Temperance, Fortitude and Justice) and the seven Vices/Sins (Pride, Envy, Sloth, Anger, Covetousness, Gluttony and Lust) although they vary.
What are examples of vices?
There are many vices. Some of the most commonly referred to vices include greed, anger, lust, envy, gluttony, pride, and sloth (laziness). Each of these is a character trait we find in people which is, on the whole, undesirable.
What does my vice mean?
A vice is a habit which is regarded as a weakness in someone's character, but not usually as a serious fault. I spend too much on clothes; that's my only vice.
How big is a record no1 vice?
Mechanics Vices – Heavy Duty Features: The Mechanics' vice is the most commonly used vice in the IRWIN® Record® range. A full line of replacement parts are available. 3″/75mm jaw width. Weight: 5.4KG.
What is a bench vise?
Bench vises are an integral part of any workstation whether it is fixed or mobile. The primary function of any vise is to hold an object safety and securely so that it can be worked on. Bench vises make work such as sanding, finishing, chipping, sawing, and welding easier by freeing the operator's hands to perform the needed task. Their simplicity and versatility means users of any skill level or experience can benefit from their use.
How large is a vise?
How large are the objects you will be holding? Vises are typically available in 4, 5, 6 & 8" sizes. These sizes refer to the width of the jaws. The larger and heavier the object to be held the larger the vise required. As a general rule of thumb, the maximum throat depth is typically proportionate to the jaw width.
What is the strength of a forging vise?
Unlike casting, the forging process uses solid blocks of steel that are heated and then pounded into their required shape. This production method is common in the tool industry when manufacturing wrenches and pliers. A high quality forged vise can have a tensile strength of 90,000+ PSI compared to 19,000-60,000 Psi for a cast vise.
What is a metalworking vise?
For the purpose of this article, we will be focusing on the metalworking vise, often referred to as the Engineer's, Mechanics, Combination, or Tradesman vises. Metalworking vises are designed to be fastened to a sturdy table via eyelets located at the sides and back of the vise. The dynamic jaw (explained later) is designed to hang over the edge of the table. Although vises are primarily designed to hold a work pieces horizontally, the overhanging front jaw does permit the holding of objects vertically.
How are bench vises made?
Bench vises are commonly made in two distinct processes: casting and forging. Casting is the most common and cost effective manufacturing process. It involves pouring hot liquid metal into molds. Once poured into the mold the liquid steel is allowed to cool.
Where are the pipe jaws located in a bench vise?
Look for a bench vises with integrated pipe jaws. These extra jaws are located in the throat of the dynamic and static jaw and are serrated and curved specifically to hold pipes. Determining the max pipe diameter is important in determining the size of vise you will need.
Where is the handle on a vise?
Handle – is located at the front of the vise. It acts as the lever that turns the lead screw, which in turn moves the dynamic jaw. The handle is engineered to match the maximum clamping power the vise can handle. A properly designed and manufactured handle will bend when too much force is applied.
What is a bench vise?
Drilling is a standard operation that you will find in plumbing, carpentry, electrical fittings, and interior decors job site. Steadiness and care are inevitable in a drilling operation. A bench vise can hold the drill to an accurate position, and the drill can perform to create a hole proficiently. A bench vise spreads its hand to give you an impressive drilling experience. You can’t avoid using a bench vise in drilling types of applications.
What is the purpose of a bench vise?
The primary purpose of a bench vise is to hold an object securely.
Why use a bench vise for carpentry?
Except for the gravitational force, extra pressure is needed to keep the pieces together until they are dry. For this reason, using a bench vise will be the best choice in holding the wood-pieces together. Also, it makes the adhesive quick dry or sticking with the material. Except for carpentry work, if any other job site needs similar work, a bench vise is always ready to provide you a comfortable operation.
Where to place washer and lock washer on bench vise?
Step 05: You need to position the washer and lock washer at the underneath hole of the bench vise. Give the nut a hand tightening. Follow the same process for every bolt.
Do you need a bench vise for metal cutting?
In the metal works, a bench vise is mostly required while the metal cutting operation is going on. If you want to perform a perfect cut at the top and bottom part of metal, the opposite end needs to be held tightly. In this type of operation, a bench vise aids the best.
Do you have to use a bench vise for sanding?
That is, related elements, such as a door or a grill, should be fixed appropriately in the workplace. In this regard, you have to use a bench vise. Also, your hands will remain safe as you are not using your hands to do the sanding.
Is it hard to mount a bench vise?
Mounting a bench vise is not a challenging task, but doing it properly is quite tricky. Also, a properly mounted bench vise will give you the best efficiency undoubtedly.