What size vise is equivalent to a Bessey 6?
It has a maximum opening of 5.25″, a throat depth of 2.75″ and weighs 44lbs. So a “little” 3.5″ jaw vise is almost the match for the Bessey 6″ vise in every way except for jaw width.
How high should a work vise be?
Many of them are 10″ or taller, and if you aren’t a really tall person, they can put the work piece too high for comfort. In many cases people buy or build dedicated stands that bolt to the floor, or build a short bench just for the vise to put it at the right work height.
What size vise does Lowe’s sell?
It opens 6″ and has a throat depth of 3″. That’s a pretty typical big box store vise, and is actually on the large side of what they normally offer. If you only have a Lowe’s nearby, they offer an Irwin 6″ mechanic’s vise that has very similar specs (6″ opening and 3″ throat depth) but only weighs 31lbs.
What is the difference between Irwin Vise and Wilton vise?
In short, the two vises are very similar, but one sounds like it’s a much smaller vise because the jaws aren’t as wide. If you were only able to look at the 6″ Irwin vise at Lowe’s it’s actually closer to the body size of the 3″ Wilton if you add a swivel base to the 3″ in the picture below.
How big is a 6 vise?
18 x 8.7 x 9.7 inchesEnhance your purchaseMaterialCast IronItem Dimensions LxWxH18 x 8.7 x 9.7 inchesColorBlackStyle6-Inch Shop ViseItem Weight42 Pounds1 more row
What size is a number 3 vice?
3 Mechanics Vice 4in : Amazon.co.uk: DIY & Tools....Technical Details.ManufacturerAutoMotion Factors LimitedProduct Dimensions36.8 x 19.2 x 18.8 cm; 500 GramsItem model number3Size100mmColourGrey10 more rows
How is the machinist bench vise measured for size?
How is the machinist's bench vise measured for size? By the width of the jaws.
How do you choose a vice?
Select a vise based on the type of material of the workpiece, the jaw capacity you need for your material, and the desired mounting style. Secure your metal workpieces for grinding, cutting, filing, and other metalworking processes with these heavy-duty vises.
What size is a number 1 vice?
Irwin Record No. 1 Mechanics Vice 3.inMaterialHardened Steel,Metal,IronBrandRecordItem dimensions L x W x H27.9 x 26 x 6.5 centimetresColourGreyStyleSafety1 more row
What size is a record No 1 vice?
75mm1 3″ (75mm) Mechanics Vice 1ZR.
What is throat depth on a vise?
The throat depth is how deep the jaws of a vice are and is measured by the vertical distance from the top edge of the jaws down to the top of the screw/slide. This indicates the maximum height of a workpiece that is capable of fitting into the throat of a vice.
What are the types of vice?
There are the following types of vices used in the workshop: Bench Vice. Pipe Vice. Tool Makers Vice.
What is a fractal vise?
The fractal vise is actually made up of a series of stacked arcs, whereby each arc houses two smaller arcs that have half the diameter. In Teaching Tech's open-source design, there are four layers of these arcs, meaning each jaw of the fractal vise features eight arc grippers which hold the part in place.
What size vice should I get?
For general household DIY, a 4- to 5-inch vise is large enough to handle most tasks. (This measurement is the length of the jaws from end to end and is maximum amount of contact your vise has with the workpiece.)
What kind of tool is a vice?
vise, also spelled Vice, device consisting of two parallel jaws for holding a workpiece; one of the jaws is fixed and the other movable by a screw, a lever, or a cam. When used for holding a workpiece during hand operations, such as filing, hammering, or sawing, the vise may be permanently bolted to a bench.
Where are record vices made?
SheffieldRecord vises were made by The Record Tools Factory, Sheffield in the UK and they manufactured vises between 1909 to 2000.
What is a bullet vise?
Wilton Bullet Vises are made to handle industrial abuse day in and day out. These are the highest quality vises available and have been made by Wilton since 1941. Bullet vises utilize a fully enclosed design and use a 3x longer spindle nut which will never strip out. Most models available in swivel base or fixed base.
What is the vise handle length measurement?
It’s exactly what it sounds like. I didn’t include a picture for this one. It is however just as important , particularly if you are not placing your vise on the corner of your workbench.
What is the weight of a vise? Why is it important?
Heavy vises require heavier and more stable workbenches, but can also generally be used for heavier jobs and workloads. This vise is the heavy duty Yost 750-DI
Clamp Opening
While heavy duty vises are usually bolted to a table, smaller varieties will often have a clamp on the underside of the vise that allows you to quickly attach it to working surfaces. The clamp opening just measures how wide this clamp opens.
How do I know my vise size?
This is determined by the length of the screw (which holds the jaws together), and the longer the screw, the further the sliding jaw can open from the stationary jaw. The opening indicates the maximum capacity of the jaws, meaning that the vice will not be able to clamp an object wider than this.
How big is a 4 vise?
Compare with similar items This item Wilton General Purpose 4-Inch Bench Vise, 4-Inch Opening (11104) TEKTON 4 Inch Swivel Bench Vise | 54004 Sold By Amazon.com Amazon.com Item Dimensions 12 x 5.9 x 6.4 inches 10.6 x 4.8 x 5.6 inches Material Alloy Steel Cast Iron Measurement System Inch Inch.
How do you pick a vice?
While selecting a bench vise, you have to check its throat depth – this is the distance from the top side of the jaw to the top of the slide below the jaw. Larger throat depths mean you can hold larger workpieces. Bench vises have varying jaw widths. For larger objects, you need bench vises that have bigger jaw widths.
What is the difference between vice and vise?
The noun vice means an immoral or undesirable practice. In titles (such as vice president), vice means one who acts in the place of another. In American English, the noun vise refers to a gripping or clamping tool.
What size is a record number 3 vice?
Technical Details Manufacturer AutoMotion Factors Limited Product Dimensions 36.8 x 19.2 x 18.8 cm; 500 Grams Item model number 3 Size 100mm Material Cast Iron, Iron.
What should be avoided when mounting work in a vise?
What should I not do? Do not weld the base of the vise to any metal. Do not repair a vise by welding or brazing. Do not try to bend a heavy rod in a light vise. Do not cut into the jaws. Do not apply heavy pressure at the corner of the vise jaws. Do not use a handle extension (e.g., a pipe) for extra clamping pressure.
How do you identify Wilton vise?
You can tell the age of the vise by looking at the bottom of the guide rail (with the vise opened wide). As can be seen, it is stamped with 4-53.
Vise Total Weight
A quick search on amazon will reveal there are vises as small as 1.5lb (.68kg), and as large as 220lbs (99.7kg). You could make the argument that the 1.5lb vise is not an engineers vise, but these vise names are not standardized, so it may be a bit pedantic to do so.
Vise Jaw Width
The jaw width is a measure of how wide the jaws are along the horizontal axis.
Vise Jaw Opening
The jaw opening is a measurement of how wide the mouth of the jaw can open. There can be quiet a range of jaw openings, but most vises will fit in between 2.5″ and 12″ (63.5mm-304.8mm).
Vise Throat Depth
The vise throat depth measurement measures how deep a vise is vertically from the top of the vise jaw down to the leadscrew/slide.
