eBay (lower margins but less work, product comes to you) While eBay is usually the most expensive route to find an old bench vise
Vise
A vise or vice is a mechanical apparatus used to secure an object to allow work to be performed on it. Vises have two parallel jaws, one fixed and the other movable, threaded in and out by a screw and lever.
What is the best Workbench vise?
Made from high strength steel, the Wilton 11104 Bench Vise is the best workbench vise on the market. With many models and brands constructed from forged iron or cast iron, their level of durability cannot be compared to that of the Wilton bench vise.
What features should you look for in a bench vise?
It’s also important to note that most of the best bench vises have replaceable jaws. This is a good feature, because the jaws’ grippy surfaces can wear down over time, affecting their ability to grab hold of a workpiece. Replacing the jaws can extend the lifespan of a vise. Jaw width refers to the length of the vise’s clamping surface.
How much does a bench vise cost?
However, industry-standard bench vises are going to cost extra. You can expect to pay up to $600 for the very best vises on the market. Typically, the most popular woodworking vise will be priced between $50 - $150. No matter your price point, you will be able to find a bench vise that should serve you well.
What is a bench vise made of?
Even though it’s not engineered to accommodate heavy-duty activities, this bench vise is an exceptional unit made from a durable, long-lasting material. The tabletop vice is a 6-inch heavy-duty bench vise made from cast iron. It features durable and robust main jaws constructed with steel for increased efficiency.
How do you size a bench vise?
Vises are typically available in 4, 5, 6 & 8" sizes. These sizes refer to the width of the jaws. The larger and heavier the object to be held the larger the vise required. As a general rule of thumb, the maximum throat depth is typically proportionate to the jaw width.
How is vice size determined?
This is determined by the length of the screw (which holds the jaws together), and the longer the screw, the further the sliding jaw can open from the stationary jaw. The opening indicates the maximum capacity of the jaws, meaning that the vice will not be able to clamp an object wider than this.
What are the best brand of bench vises?
BEST OVERALL: Forward 8-Inch Bench Vise Ductile Iron.RUNNER-UP: Wilton 11106 Wilton Bench Vise.BEST BANG FOR THE BUCK: TEKTON 4-Inch Swivel Bench Vise 54004.UPGRADE PICK: Wilton WS8 Shop Vise (63304)BEST FOR WOODWORKING: Pony Jorgensen 27091 Medium Duty Woodworker's Vise.More items...•
What are the different types of bench vice?
Types of VicesBench Vice.Pipe Vice.Tool Makers Vice.Hand Vice.Leg Vice.Drill vice.Pin Vice.
What size is a number 3 vice?
3 Mechanics Vice 4in : Amazon.co.uk: DIY & Tools....Technical Details.ManufacturerAutoMotion Factors LimitedProduct Dimensions36.8 x 19.2 x 18.8 cm; 500 GramsItem model number3Size100mmColourGrey10 more rows
How can vice be specified?
A vise or vice (British English) is a mechanical apparatus used to secure an object to allow work to be performed on it. Vises have two parallel jaws, one fixed and the other movable, threaded in and out by a screw and lever.
Are clamp on vises good?
As such, clamp-on vises are typically most useful for light duty operations. That's not to say that they can't take some abuse and some torque, but the upper limit just isn't as high as a traditional vise.
Are Irwin vise any good?
The Bottom Line. The Irwin Multi-Purpose Vise is very attractive for about $95 as long as you keep in mind its light-duty design intent. It's a great fit for a DIYer's shop or garage and has some potential for Pros that don't need 2 tons or more (literally) of clamping force.
Where do you hang a bench vise?
0:075:05BENCH VISE - How To Install A Vise - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe side of the bench.MoreThe side of the bench.
What are the 4 vices?
These are generally: the three Theological Virtues (Faith, Hope and Charity) and the four Cardinal Virtues (Prudence, Temperance, Fortitude and Justice) and the seven Vices/Sins (Pride, Envy, Sloth, Anger, Covetousness, Gluttony and Lust) although they vary.
What is a universal vise?
Definition of universal vise : a vise (as on some milling machines) that can be swung either horizontally or vertically — compare swivel vise.
What should be the height of vice?
A bench vice is a mechanical apparatus used to secure an object that is to be worked on. It features two parallel jaws as part of the design. The device is widely used in the mechanical and woodworking industries, among others. For general purpose, a bench vice is fixed at a height of 106 cm from floor.
How big is a record no1 vice?
Mechanics Vices – Heavy Duty Features: The Mechanics' vice is the most commonly used vice in the IRWIN® Record® range. A full line of replacement parts are available. 3″/75mm jaw width. Weight: 5.4KG.
How do I choose a woodworking vise?
7:0312:00Pick the RIGHT vise for woodworking. - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey make your bench more expensive. And time consuming to build because you're buying a second viceMoreThey make your bench more expensive. And time consuming to build because you're buying a second vice. And it really needs to be quick release your tail vise needs a dog built into the jaw.
How heavy is a vice?
The total weight of the unboxed Vice is a solid 18kg. The Anvil section is milled and polished to give a smooth surface which can be used for Metal Forming, Riveting and General Metalwork.
Which type of thread is used in bench vice?
Buttress Thread: In this thread, one flank is perpendicular to the axis of the thread and another flank is at 45°. These threads are used in power press, carpentry vices, bench vice and gun breeches, ratchets etc.
What is a bench vise?
Bench vises are used to enable the user to fix a piece of material in one place.
What type of vises are used for bench work?
Mount type – The most common bench vises have one of two types of mounting interface. You can choose between the bolt-on type and the clamp type. The bolt-on type includes 4 bolts used for attaching the tool on the bench. This way the fixing of your bench vise is great, even though much difficult to install, but you can apply higher pressure on your project. Clamp type bench vises are easier to install, but the security is not that high and it can be used for lighter applications.
What is the difference between a medium duty bench vise and a heavy duty vise?
This decision is individual, based on your plans related to the usage of your bench vise. A medium duty bench vise would do the majority of home tasks, while a heavy-duty vise is designed for an extensive use and professionals.
What is the difference between a vise jaw and a flat jaw?
What you have to know is that there are different size and types of jaws. The size of the jaws represents how far they open, while the style of the jaws can be flat and V-jaws. Flat jaws are designed to hold flat objects, while V-jaws are able to hold other round items such as metal tubing. In addition, some vise jaws are replaceable which is very important if you are using the vise frequently.
What is quick release on bench vise?
Quick release – Twisting the spindle manually each time you want to release an object from its jaws can be irritating and can slow you down. That is when the quick release comes into play. The process would be quicker and easier if your bench vise includes this feature.
What is the purpose of the wooden jaws on a bench vise?
What it has are wooden jaws so that the wood is not damages while held by the bench vise.
What is the purpose of bench vises?
The majority of bench vises are quite similar and they are all designed for the same purpose – to hold the materials while the job is done on them.
How much does a woodworking vise cost?
This kind of tool will sit flush with the workbench, and the jaws are made of wood so as not to mar finishes. This woodworking vise from Rockler is $85 and bolts directly to the workbench.
What is a vise tool?
A vise is simply a tool used to secure an object while you work on it. There are two parallel jaws that, when squeezed together via a threaded lever, hold the workpiece still. Vises are used in metalworking, woodworking, electronics, model-making, and in any situation that requires keeping your hands a safe distance away from the workpiece, ...
How big is a vise for a woodworker?
Woodworkers, machinists, and welders need a work-specific vise that probably isn't the best option for most homeowners. For general household DIY, a 4- to 5-inch vise is large enough to handle most tasks.
How long does a vise last?
A quality vise can last for years, and can be a great used tool purchase. Remember to buy a vise based on what you need it for and the size of your work bench and you can't go wrong. This content is created and maintained by a third party, and imported onto this page to help users provide their email addresses.
What is a vise in a workshop?
They aren't the sexiest tools and the basic designs haven't changed in centuries, but when you need a solid helping hand, a vise is irreplaceable. A vise is simply a tool used to secure an object while you work on it.
Do gear obsessed editors get paid?
Gear-obsessed editors choose every product we review. We may earn commission if you buy from a link. How we test gear.
Can you use a vise as an anvil?
Compare two vises and you may find that while the jaw length is the same, one vise may look and feel much heavier than the other. If you're going to use the vise as an anvil and pound on it, you want to know it can take the abuse. Note: Your workbench must be able to handle the weight of a larger vise, so buy accordingly.
What is a bench vise?
A staple in metalworking, automotive work, woodworking, and hobbyist shops, a bench vise is a metal clamping device that bolts to the top, side, or underside of your workbench.
What are the different types of bench vises?
Types of Bench Vises. There are three main types of bench vises: benchtop, front, and end vises. Each style has its merits, though the project at hand will most likely determine which will work best for your needs.
What is a Wilton bench vise?
The Wilton bench vise can help most DIYers clamp down and hold on to materials with its sturdy build and 360-degree swivel base. Hobbyists who need a little less swivel and bulk might start with the basic, affordable TEKTON bench vise.
What is a vise for woodworking?
This vise mounts to the front of your woodworking bench with lag screws (sold separately). It has two additional holes on each jaw for securing sacrificial wood jaw inserts (blocks of wood that clamp against the workpiece to avoid the metal jaws marring expensive hardwoods). There’s also a slide-up steel dog in the outer jaw, allowing you to clamp your workpiece against a bench dog for surface planing and flattening. Plus, the orange enamel finish is baked on for extra durability.
How do benchtop vises work?
Benchtop vises mount directly to your benchtop surface. They usually mount with four bolts that sandwich the vise’s base against the benchtop. It’s a good idea to mount a benchtop vise directly over a table leg. The leg will create a solid surface to hammer over, while the unsupported center of a bench may be overly bouncy and absorb a lot of your striking power.
How wide is a cast iron shop vise?
This 30,000 PSI cast iron vise features 8-inch replaceable jaws, a jaw opening of up to 8 inches wide, and a throat depth of 4 inches. It can also clamp pipes as small as 3/4-inch in diameter and up to 3 inches—more than 1/4-inch larger than other models—to provide more capability than most other bench vises.
How wide is a bench vise?
For a medium-duty, no-frills bench vise, this one is worth checking into. It is a 30,000 PSI steel vise with 6-inch wide serrated replaceable jaws and a jaw opening of up to 6 inches, covering most DIY and home workshop needs.
Where do you mount a vise?
This type of vise typically mounts to the front, or end of your workbench, as opposed to the top like most of our other options. We’ve found that this allows you to more easily maneuver around your work piece, and makes them much more convenient for woodworking. This vise also features wide jaw plates, which give you more surface area to clamp long pieces of wood in place. Pre-drilled holes in the jaws allow you to mount wood faces to them, which help reduce the chances of wooden workpieces being dented by the metal jaws.
What is a compact vise?
This compact vise is the perfect size for holding smaller items like keys, acrylic pieces, or compact craft objects. The nylon-covered jaws are also well-suited for more delicate items, and are less likely to dent or mar your work piece.
What color hammer to use with vise?
This four-pound hammer will pair perfectly with this vise’s anvil surface, and is designed with an anti-vibration neck for comfortable striking. This bright green color of both the hammer and vise are a nice perk, and help them stand out in a busy workshop.
How many degrees can a Wilton swivel base rotate?
The swiveling base can rotate 360 degrees, and features two pivot locks so you can secure it in whatever position you prefer. It includes a good-sized anvil surface, and just like our other Wilton picks, this model comes with a lifetime warranty.
Is the Olympia bench vise good?
This Olympia model could be a great choice if you don’t have the budget for a higher-end option, but still want the clamping power and convenience of a bench vise.
Can you swivel a vise?
You can also swivel it to whatever position you prefer, which can come in handy when you really need to focus on precision crafting tasks. If you’d prefer to use this as a temporary vise, you can forgo the bolts and simply clamp it to your workbench. We especially appreciate the anvil surface, a nice perk not usually found on vises this small.
What is a bench vise?
A solid bench vise is like an extra set of very strong hands, and having one can actually improve your work: As long as it's attached to a sturdy workbench, a bench vise will hold a workpiece in a still and relatively vibration free state and help you make smoother saw cuts, more steady plane strokes, or even get your sanding done faster.
Where is the front vise on a work bench?
A front vise, like the Rockler 9" Quick Release Workbench Vise , is most often stationed at the left corner of the long edge of the work bench. A front vise is great for holding a drawer side upright while you cut the tails of a dovetail joint, or holding a board edge-up horizontally for hand planing, or for any number of other tasks that require a solid hold on the workpiece and for both of you hands to be free.
Why do Rockler bench vises tilt?
Also, it's important to note that Rockler bench vises, and most other quality vises, use a toe in design, meaning that the outer jaw tilts inward slightly to account for outward flexing and to apply the greatest pressure at the top of the jaws where it is most needed.
How many jaws does a cast iron vise have?
A cast iron front vise has two jaws made of you guessed it cast iron and a steel screw to move them closer together and further apart. Most also have two steel rods to keep the jaws aligned and help to prevent flexing inward of either side of the outer jaw when only one side of the vise is used.
What is the purpose of an end vise?
Typically, the primary function of an end vise is to hold material flat on the surface of the bench, pinched between one or more "dogs" sticking up from the top surface of the vise's jaw and corresponding dogs fitted into holes in the bench surface.
How thick is a 9" vise?
A 9" capacity vise with 3/4" thick pads will give you 7-1/2" to work with, which is plenty in most situations. But the odd occasion does arise when more would come in handy. A 13" opening capacity vise should have you covered for just about anything you run into.
Can you put off buying a bench vise?
Even though many woodworkers would rate a bench vise as an indispensable tool, it's an easy one to put off buying. You can get by reasonably well with an arrangement of handscrew clamps and c-clamps for a while.
