Place the rear jaw upside down on the inverted benchtop and measure how far the top of the jaw extends below the bottom. 14″ for a 7″ vise, 12″ for a 10″ vice (The former is required for the smaller vise.) Add enough to the cheek width to make it approximately 18″ above the bench surface when mounted.
How to choose the right bench vise for You?
Look for a bench vises with integrated pipe jaws. These extra jaws are located in the throat of the dynamic and static jaw and are serrated and curved specifically to hold pipes. Determining the max pipe diameter is important in determining the size of vise you will need.
How big of a vise do I Need?
For general household DIY, a 4- to 5-inch vise is large enough to handle most tasks. (This measurement is the length of the jaws from end to end and is maximum amount of contact your vise has with the workpiece.) The throat depth, measured from the top of the jaws to the top of the slide below it, is also something to consider.
What is the throat of a bench vise?
The throat of a bench vise is the distance from the top of the slide to the top of the jaws. If a bench vise has a long throat, it can hold large workpieces without any hassle. Before making a purchase, unwind the bench vise as far as it will go to ensure it can cope with the required tasks.
What is a bench vise made of?
Even though it’s not engineered to accommodate heavy-duty activities, this bench vise is an exceptional unit made from a durable, long-lasting material. The tabletop vice is a 6-inch heavy-duty bench vise made from cast iron. It features durable and robust main jaws constructed with steel for increased efficiency.
What size is a number 3 vice?
3 Mechanics Vice 4in : Amazon.co.uk: DIY & Tools....Technical Details.ManufacturerAutoMotion Factors LimitedProduct Dimensions36.8 x 19.2 x 18.8 cm; 500 GramsItem model number3Size100mmColourGrey10 more rows
How big is a 6 vise?
18 x 8.7 x 9.7 inchesEnhance your purchaseMaterialCast IronItem Dimensions LxWxH18 x 8.7 x 9.7 inchesColorBlackStyle6-Inch Shop ViseItem Weight42 Pounds1 more row
How do I choose a bench vise?
While selecting a bench vise, you have to check its throat depth – this is the distance from the top side of the jaw to the top of the slide below the jaw. Larger throat depths mean you can hold larger workpieces. Bench vises have varying jaw widths. For larger objects, you need bench vises that have bigger jaw widths.
What is the normal range size of bench vise jaw width?
Type Of Vice: Bench Vice. Base Type: Swivel. Jaw Width: 4" Jaw Opening: 4 Inch.
What size bench vise is best?
For general household DIY, a 4- to 5-inch vise is large enough to handle most tasks. (This measurement is the length of the jaws from end to end and is maximum amount of contact your vise has with the workpiece.)
Are Wilton vises Made in USA?
Top positive review. Be aware that Wilton produces these in Tawian now under model Number 28806 1755, the 28806 models are overseas made (not China but Tawain). Tawain tools produced for sale in the US seem to have better quality than their Chinese counterparts. The 63200/1755 models are USA made.
How do you measure a vice size?
The throat depth is how deep the jaws of a vice are and is measured by the vertical distance from the top edge of the jaws down to the top of the screw/slide. This indicates the maximum height of a workpiece that is capable of fitting into the throat of a vice.
What is the best bench vice?
Best Bench Vise: ReviewsTEKTON 4-Inch Swivel Bench Vise. ... Wilton 11106 Wilton Bench Vise. ... Forward DT08125A 5-Inch Heavy Duty Bench Vise. ... Olympia Tool Bench Vise. ... Yost Tools Bench Vise Tool. ... IRWIN Tools Multi-Purpose Bench Vise. ... Grizzly Industrial G7062-5″ Multi-Purpose Bench Vise. ... WEN MPV502 Multi-Purpose Bench Vise.More items...•
How many types of bench vices are there?
threeThere are three main types of bench vises: benchtop, front, and end vises.
Are clamp on vises good?
As such, clamp-on vises are typically most useful for light duty operations. That's not to say that they can't take some abuse and some torque, but the upper limit just isn't as high as a traditional vise.
Are Irwin vises good?
The Bottom Line. The Irwin Multi-Purpose Vise is very attractive for about $95 as long as you keep in mind its light-duty design intent. It's a great fit for a DIYer's shop or garage and has some potential for Pros that don't need 2 tons or more (literally) of clamping force.
Which type of jaws would you use on a bench vise for heavy clamping needs?
Also, soft jaws of leather or a softer metal are used for gripping soft metals. Parallel clamps are used for heavy duty clamping work, and C-clamps are used for holding precision setups.
How do I know my vise size?
Vises are typically available in 4, 5, 6 & 8" sizes. These sizes refer to the width of the jaws. The larger and heavier the object to be held the larger the vise required. As a general rule of thumb, the maximum throat depth is typically proportionate to the jaw width.
How the size of Vice is stated?
The size of the engineer's vice is stated by the width of the jaws.eg. 150mm parallel jaw bench vice.
How big is a record no1 vice?
Mechanics Vices – Heavy Duty Features: The Mechanics' vice is the most commonly used vice in the IRWIN® Record® range. A full line of replacement parts are available. 3″/75mm jaw width. Weight: 5.4KG.
How do you identify a Wilton vise?
The identifying company and model information can be found on the sides of the back jaw. You can tell the age of the vise by looking at the bottom of the guide rail (with the vise opened wide). As can be seen, it is stamped with 4-53.
Can I attach a bench vise onto any table?
Bench vises are designed for workbenches that are strong enough to take the weight of both the vise and the workpiece. Generic tables are not built...
How big should my bench vise be?
The size of the bench vise depends on how you plan to use it. If you are only doing DIY projects, you can use a small, lightweight vise. For more i...
How should I maintain a bench vise?
The maintenance of your bench vise is crucial for its longevity. Besides wiping the tool clean after every use, you can also remove the slide every...
What is the tensile strength of ductile iron?
Tensile and Yield Strength– ductile iron has a minimum tensile strength of 60,000 PSI and minimum yield strength of 40,000 PSI. Gray iron by comparison has no measurable yield strength and a tensile strength of 20,000–60,000 PSI.
What is the strength of a forging vise?
Unlike casting, the forging process uses solid blocks of steel that are heated and then pounded into their required shape. This production method is common in the tool industry when manufacturing wrenches and pliers. A high quality forged vise can have a tensile strength of 90,000+ PSI compared to 19,000-60,000 Psi for a cast vise.
What is a metalworking vise?
For the purpose of this article, we will be focusing on the metalworking vise, often referred to as the Engineer's, Mechanics, Combination, or Tradesman vises. Metalworking vises are designed to be fastened to a sturdy table via eyelets located at the sides and back of the vise. The dynamic jaw (explained later) is designed to hang over the edge of the table. Although vises are primarily designed to hold a work pieces horizontally, the overhanging front jaw does permit the holding of objects vertically.
How large is a vise?
How large are the objects you will be holding? Vises are typically available in 4, 5, 6 & 8" sizes. These sizes refer to the width of the jaws. The larger and heavier the object to be held the larger the vise required. As a general rule of thumb, the maximum throat depth is typically proportionate to the jaw width.
How much impact resistance does ductile iron have?
Impact Resistance - ductile iron has a greater resistance to impacts. It is capable of resisting a minimum of 7-foot pounds of impact compared to only 2 pounds for gray iron. This can be critical if the vise has an anvil or the user frequently delivers inaccurate blows which hit the vise.
How are bench vises made?
Bench vises are commonly made in two distinct processes: casting and forging. Casting is the most common and cost effective manufacturing process. It involves pouring hot liquid metal into molds. Once poured into the mold the liquid steel is allowed to cool.
Where are the pipe jaws located in a bench vise?
Look for a bench vises with integrated pipe jaws. These extra jaws are located in the throat of the dynamic and static jaw and are serrated and curved specifically to hold pipes. Determining the max pipe diameter is important in determining the size of vise you will need.
How to attach a vise to a spacer block?
Place the vise on the spacer block, cheek in notch. Mark and drill pilot holes, then lag bolt the vise in place. Using a straightedge, align the jaw with the bench’s edge. If it’s prideful, plane it.
How to cut a notch in a bench?
Backsaw the crosscut into the benchtop edge. Then use a circular saw to cut the notch with a straightedge clamped to the bench. Then rip the notch until it intersects the previous crosscut.
What size vise should I use for a bench dog?
Because a face vise is utilized for both general work and edge planing, I suggest a bigger vise (at least 10″). A smaller end vise should work well with bench dogs to secure boards for face-planing. For face-planing and other tasks, I use a tiny (7″) model since the dog is only 312″ from the front edge of the bench.
How to make a wooden cheek?
First, measure the thickness of the jaw to create the wooden cheek. Using a 1 inch thick hardwood board “Plane it to the jaw’s thickness if it’s broader. In order to make the rear jaw, align the bottom borders as indicated in Figure 1 “at either end To create the U-shaped cheek filler, crosscut and bandsaw the piece. Glue it on 34 “-similar size thick stock, as indicated.
How far does the rear jaw extend on a 7" vise?
Place the rear jaw upside down on the inverted benchtop and measure how far the top of the jaw extends below the bottom. 14″ for a 7″ vise, 12″ for a 10″ vice (The former is required for the smaller vise.)
What is a workbench without vises?
Let’s face it: a workbench without vises is really nothing more than an assembly table. Vises offer the strength required to secure workpieces during planing, sawing, routing, and other tooling operations. The venerable Record vise is one of the many commercial types that has withstood the test of time because it is simple to install, simple to use, and built to last generations.
How big of a hole do you drill for a dog vise?
Most commercial dogs fit 34-mm holes bored perpendicular to the tabletop. Make a drill guide block from 2″ thick material by drilling a 34″ diameter hole in the middle.
What is a Tekton 4 inch bench vise?
The Tekton 4-inch swivel bench Vise is an all-purpose, medium-duty unit that is well suited for the repair of vehicles, assembling of parts as well as all your metalworks. It is a safer unit as compared to the competition, and is engineered to help you work faster and better, knowing that your workpiece is securely in place. The level of confidence you receive from using this unit cannot be experienced with any other brand or model. It is the best bench vise around, and an essential unit your shop or garage cannot function without.
What is a Yost LV-4?
The Yost LV-4 Home Vise is one of the many products that tell the centenary story of the Yost company. With over a hundred years in the production business, Yost is well-known for creating some of the world’s best tools. All items created are launched only after rigorous testing and evaluation, to ensure that they offer nothing but the best of performance to users. Yost prides itself in the creation of quality clamping tools, a passion they have fuelled and perfected over the years. Whenever you decide to purchase a new bench vice for sale, think about the Yost LV-4 Bench Vise before any other model.
What makes a bench vise sand faster?
Sanding: bench vises make the process of sanding quicker by offering stability in times where the pressure is needed.
Why do we use pivots?
Pivots are used to offer users with better access to the objects being worked on, making the process of cutting and sanding easier. Anvil - an anvil is a flat surface added to the bench vise to enable you to work with ease. It is a durable surface that helps users whose jobs involve regular striking of a material.
What is an anvil in a bench?
Anvils protect your tools, materials and workbench from experiencing extreme damage associated with your works. Mount Type - If you're planning to use significant clamping pressure, the mount is an essential feature needed in your bench vise. It is a heavy-duty way of fixing your unit.
What is MV8 vise?
The Performance Tool MV8 Hammer Machinist Vise is a heavy-duty, well-engineered bench vise, made specifically for heavy-duty works. It is a durable unit with increased longevity, made possible through its chrome plated hardware and durable powder coat finish. At first glance, this workbench unit may seem intimidating, but it is one of the best groups in the industry, recommended for both DIY beginners and professionals who want to amen larger items. The heavy-duty nature of this unit makes it highly resistant to wear and tear from regular use.
What are the features of a bench vise?
There are some bench vises with unique features that set them apart from the competition. Some features to note when making a selection include the anvil, swivel and quick release, but the most critical element is the jaw of your bench vise.
How much does a woodworking vise cost?
This kind of tool will sit flush with the workbench, and the jaws are made of wood so as not to mar finishes. This woodworking vise from Rockler is $85 and bolts directly to the workbench.
What is a vise tool?
A vise is simply a tool used to secure an object while you work on it. There are two parallel jaws that, when squeezed together via a threaded lever, hold the workpiece still. Vises are used in metalworking, woodworking, electronics, model-making, and in any situation that requires keeping your hands a safe distance away from the workpiece, ...
How big is a vise for a woodworker?
Woodworkers, machinists, and welders need a work-specific vise that probably isn't the best option for most homeowners. For general household DIY, a 4- to 5-inch vise is large enough to handle most tasks.
How long does a vise last?
A quality vise can last for years, and can be a great used tool purchase. Remember to buy a vise based on what you need it for and the size of your work bench and you can't go wrong. This content is created and maintained by a third party, and imported onto this page to help users provide their email addresses.
What is a vise in a workshop?
They aren't the sexiest tools and the basic designs haven't changed in centuries, but when you need a solid helping hand, a vise is irreplaceable. A vise is simply a tool used to secure an object while you work on it.
What does a longer throat mean?
A longer throat depth means you can hold larger pieces more securely. How wide a vise opens can be a limiting factor, so fully unwind the vise before buying it to make sure it will handle the work you need it for.
Can you use a vise as an anvil?
Compare two vises and you may find that while the jaw length is the same, one vise may look and feel much heavier than the other. If you're going to use the vise as an anvil and pound on it, you want to know it can take the abuse. Note: Your workbench must be able to handle the weight of a larger vise, so buy accordingly.