How do you get rust off old vice?
Use a wire brush and a sanding sponge to remove flaking paint, rust, and caked-on dirt. Vacuum off debris created by wire brushing. The last step is to soak a shop cloth with denatured alcohol and wipe everything clean. The cleaned parts are ready for masking tape.
How do you rebuild a bench vise?
2:2320:33Bench Vise Rebuild For FREE!!! Saved from the Scrap Yard - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you've had it in a position you needed it that way you got multiple angles you can work atMoreOnce you've had it in a position you needed it that way you got multiple angles you can work at there. The one that I bought previously at the scrapyard because mine I had cheap one and a broken soap.
How do you paint a bench vise?
0:239:17Wilton Vise Restoration Part 3 - Painting and Assembly - YouTubeYouTubeStart of suggested clipEnd of suggested clipProcess was go ahead and scrub everything up with a scotch brite pad then of course came the funMoreProcess was go ahead and scrub everything up with a scotch brite pad then of course came the fun part masking off all of the machined surfaces that I didn't want to get any primer or paint. On.
How do you restore Wilton vise?
0:5921:21Wilton Vise Restoration Part 1: Disassembly and Cleaning - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut that's actually looks pretty clean we'll have to get the screw out to take a good look at it butMoreBut that's actually looks pretty clean we'll have to get the screw out to take a good look at it but the screw looks to be in decent shape as well let's go ahead and continue tearing this down.
How do you service a vice?
To keep your vice in tip-top condition, always keep all threaded and moving parts clean by wiping the vice with a cloth after each use. This will clear any grit, dirt and debris from building up on the vice. Make sure to oil and lubricate the joints, threaded parts, and sliding section often.
How do you lubricate a vice?
0:5312:26Vise Lubricant Comparison - YouTubeYouTubeStart of suggested clipEnd of suggested clipGet a side shot of this. There we go that's what it looks. Like. So I slowly just beat it in theMoreGet a side shot of this. There we go that's what it looks. Like. So I slowly just beat it in the tolerances are kind of small on this vise. So you're really not gonna need a whole lot of grease.
What Colour blue are record vices?
A traditional ultra high quality synthetic coach and machinery enamel the corre ct colour blue for most Record workshop vice's. Is used in preference to normal commercially available enamels for decorative work of the highest standard.
What paint do you use on machines?
Polyurethane Enamel Gloss Paint Polyurethane enamel gloss is a two-in-one paint suitable for machine parts that require high chemical resistance and high gloss. It has exceptional UV resistance. These paints are ideal for metal, wood, concrete, and other suitably primed substrates.
How can I tell what year my Wilton vise is?
You can tell the age of the vise by looking at the bottom of the guide rail (with the vise opened wide). As can be seen, it is stamped with 4-53. Wilton provided a 5 year warranty on their vises with the expiration of the warranty stamped on the vise, so this vise was made in April of 1948.
What are Wilton vises made of?
The jaws are reversible and secured w/ hexscrews. (Ridged/serrated on one side/smooth on the other)I have picked up a set of Wilton 21111 5-1/2" Multi-Grip Vise Jaws made of soft polyurethane.
What is a bullet vise?
Wilton Bullet Vises are made to handle industrial abuse day in and day out. These are the highest quality vises available and have been made by Wilton since 1941. Bullet vises utilize a fully enclosed design and use a 3x longer spindle nut which will never strip out. Most models available in swivel base or fixed base.
How do you disassemble a bench vise?
3:4014:01How-To: Take Apart, Lube, & Mount A Bench Vise - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right so let's go ahead and remove the dynamic jaw all you got to do is crank it out. So thatMoreAll right so let's go ahead and remove the dynamic jaw all you got to do is crank it out. So that just comes right out all it is is a screw in here. And something I'm not going to take apart.
How do you weld a broken bench vise?
0:1712:02Repairing a Broken Vise - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou want to drill that hole right at the end of your crack there. Hey you want to drill it down asMoreYou want to drill that hole right at the end of your crack there. Hey you want to drill it down as deep as this crack goes that way that crack kind of stops.
What are the parts of bench vice?
2.2.1 Bench vice It essentially consists of a cast steel body, a movable jaw, a fixed jaw, both made of cast steel, a handle, a square threaded screw and a nut all made of mild steel.
How do you remove a vise screw?
1:504:16Removing A Broken Screw Out Of A Bench Vice - YouTubeYouTubeStart of suggested clipEnd of suggested clipDown. Because it's like a ledge. So I said well let's try a different way. So I actually take in aMoreDown. Because it's like a ledge. So I said well let's try a different way. So I actually take in a punch put in here. And actually have been smacking it with the hammer.