Step 3 - Vice Grip Pipe Wrenches
- Simply slide the handle up and down until the pipe wrench jaws are in the position you desire.
- Let go of the button that you've been holding and once again the teeth will lock into the grooved channel below. This type of pipe wrench is much faster to adjust and easier to use.
How to use a vise grip?
How to Use Vise Grips 1 Grasp the locking pliers in your hands and open them by pressing the tab on the inside of one handle. 2 Place the mouth of the pliers around the object you want to hold or turn. 3 Squeeze the handles together tightly around the object. ... 4 Pull or turn the object with the pliers until you loosen it or remove it. ...
How do you use a Vice Grip pipe wrench?
The new vice grip pipe wrench has a large button that you depress, which unlocks the teeth from the grooved channel built into the center of the wrench. Simply slide the handle up and down until the pipe wrench jaws are in the position you desire.
How much force can a Vice Grip pliers handle?
Vice grip pliers use various pivot points and levers to operate the device, so when being used, the force applied is exponential. For example, if you apply 15 pounds of pressure onto the vise grip pliers handle, then 150 pounds of force may be applied.
What are Vice Grip Channel Lock pliers used for?
Vice grip channel lock pliers are now available that work just like the above-mentioned pipe wrench. Vice grip tools are ideal to use in any situation where you need a lot of force with little effort on your part.
How do you release a vise grip?
0:506:54how to use vise grips - YouTubeYouTubeStart of suggested clipEnd of suggested clipMakes the distance. At the gripping end of the vice grips smaller and smaller so that's yourMoreMakes the distance. At the gripping end of the vice grips smaller and smaller so that's your adjustment on the vice grip as to how much space you want here to grip an object.
How do you lock vise grip pliers?
1:054:46How To Lock Vise Grips - YouTubeYouTubeStart of suggested clipEnd of suggested clipAround the object to get the correct thickness you need to first close it and then turn the boltMoreAround the object to get the correct thickness you need to first close it and then turn the bolt clockwise. Until you can't rotate it any further then remove it. Then close it.
When should you use a vice grip?
Vice grips are used for just about anything you can think of. For house projects they can be used to temporarily hold a long straight edge on plywood so you can mark a line. They can also be used to remove stripped bolt heads if they are not too tight.
What is the difference between a vice grip and a wrench?
Locking pliers (wrench or a vice grip) are pliers that can be locked into position, using an over-center toggle action. Vice grips are the extra set of hands every day needs. The locking feature allows them to be clamped tight and stay that way while you make a cut, measurement or free a stripped bolt.
Are vice grips a wrench?
Locking pliers (also called Vise-Grips, a vice grip, or a Mole wrench) are pliers that can be locked into position, using an "over-center" cam action. Locking pliers are available with many different jaw styles, such as needle-nose pliers, wrenches, clamps and various shapes to fix metal parts for welding.
What do channel locks look like?
1:053:23Bad Daddy Braddy Teaches The Right Way to Use Channel-locksYouTubeStart of suggested clipEnd of suggested clipThis falls off so channel locks are a directional tool they're meant to be you know grabbed and heldMoreThis falls off so channel locks are a directional tool they're meant to be you know grabbed and held onto.
Is Vise Grip a holding tool?
Vises are stationary work-holding tools designed to clamp down on material and keep it from moving while working.
What are needle nose vise grips used for?
These can be used to grip and pull nails and fasteners, hold a workpiece in place, and they can even be used as a replacement knob for a machine. You can depend on locking pliers for anything you need to securely hold.
What is the underarm vise grip?
0:011:13Spinal Management Vice grip rollover - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou need to be in sufficiently deep water to be able to submerge underneath the patient.MoreYou need to be in sufficiently deep water to be able to submerge underneath the patient.
Why do plumbers use channel locks?
They can be used to pinch and grab like other pliers, to tighten nuts and bolts, for instance. In plumbing, they can have many functions such as tightening pipes as one channel lock can function as a clamp to hold down one pipe while another is used as a wrench to move the other one.
What are the different types of vice grips?
VISE-GRIP® GROOVELOCK™ Pliers.VISE-GRIP® Locking Pliers.VISE-GRIP® Diagonal Cutting Pliers.VISE-GRIP® Combination & Lineman's Pliers.VISE-GRIP® Long Nose Pliers.VISE-GRIP® Specialty Pliers.
Why do they call a pipe wrench a monkey wrench?
Charles Moncky, a Baltimore mechanic, invented the monkey wrench around 1858. Moncky's wrench was named using a purposeful misspelling of his name.
How do vice grips lock?
0:091:05How to Use Vise Grips - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd twist the adjustment knob until the jaws are snug. Before the clamp gets too tight release themMoreAnd twist the adjustment knob until the jaws are snug. Before the clamp gets too tight release them and give the knob another half turn now close the vise grips and squeeze until you hear the click.
How do you use torque locking pliers?
0:421:33Milwaukee 10" torque locking pliers at Do it Best® - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhere you have to twist it by hand or there's not a good way to do it with the torque lock knob hereMoreWhere you have to twist it by hand or there's not a good way to do it with the torque lock knob here you can fasten to your material. Twist. It and get your precise setting.
What are locking pliers good for?
Locking pliers are pretty much what their name implies—pliers that lock into position, allowing them to tightly grip objects with remarkable strength. The exact point at which the pliers go from “open” to “locked” is adjustable, allowing you to lock them on to items of different sizes, such as nuts and bolts.
Are channel locks pliers?
Channel lock pliers, named after the American company that produces them – Channellock -- are used for grabbing and pinching things. They're made from sturdy materials such as high-carbon steel, and their gripping jaws provide a strong grip on an object.
What is a Vise plier?
A versatile pair of pliers that locks effectively around different objects, the Vise Grips is small enough to grasp even tiny screws, yet it has a strong grasp that will not let go until you release it.
When were vise pliers invented?
According to the Living History Farm website, William Petersen patented a primitive version of the Vise Grips in 1921. In 1957, the final version of the Vise Grips still used today debuted. Use locking pliers to clamp objects where other types of vises or tool will not fit. Advertisement.
How to open pliers?
Grasp the locking pliers in your hands and open them by pressing the tab on the inside of one handle. As you press this tab, the handles will separate, enabling you to position the mouth of the pliers.
How does a vise grip work?
How a Vise Grip Works. If you are mechanically minded, you may be interested in how things work such as that pair of vise grip pliers you always seem to be using. Regular pliers have 1 pivot point, but vise grip pliers have multiple pivot points that apply direct pressure to the handle as it is squeezed. A vise is really just something that applies ...
What is a vice grip?
Vice grip tools are ideal to use in any situation where you need a lot of force with little effort on your part. The new line of vise grip tools make it easier and faster for the professional to get their work done without having to worry about poor quality tools.
How much force is applied to a vice grip plier?
Vice grip pliers use various pivot points and levers to operate the device, so when being used, the force applied is exponential. For example, if you apply 15 pounds of pressure onto the vise grip pliers handle, then 150 pounds of force may be applied. So, with very little work on your part, a lot of force can be applied to that old, ...
How do vice grip pliers work?
Finally the third pivot point, which is located at the jaw of the pliers is forced closed. Vice grip pliers use various pivot points and levers to operate the device, so when being used, the force applied is exponential. For example, if you apply 15 pounds of pressure onto the vise grip pliers handle, then 150 pounds of force may be applied. So, with very little work on your part, a lot of force can be applied to that old, rusty bolt that you are trying to loosen up.
Why do plumbers use thumb wheel?
Plumbers know it is a pain to have to turn the mechanical thumb wheel on regular pipe wrenches because it takes a lot of time. The new vice grip pipe wrench has a large button that you depress, which unlocks the teeth from the grooved channel built into the center of the wrench.
Can channel lock pliers be used with vice grip?
After use, the jaws can loosen up, making the pliers useless. Vice grip channel lock pliers are now available that work just like the above-mentioned pipe wrench.
What to do if vise grips don't remove bolt?
If the vise grips do not succeed in removing a bolt, you have two options: using an extractor kit or using one of a few welding techniques. Use a bolt extractor if the head of the bolt has broken off or is otherwise inaccessible. You’ll need a center punch, a drill, a drill-extractor set (Easy-Outs), and WD-40.
How Do You Remove a Broken Bolt with Vise Grips?
Removing a broken bolt with vise grips requires a bolt head or some other bolt component to be present upon which the vise grips can lock.
How to lubricate bolts?
Saturate the bolt joint with penetrating oil, which should help lubricate the thread s. Allow the oil to soak in over several days.
How to remove a faulty bolt?
When encountering a bolt that retains its head but is otherwise damaged, one of the simplest solutions to extract the faulty bolt is to use a vise grip, a type of plier. Like many other types of pliers, the jaws of the vise grip tighten around the bolt head and then use the handles as a type of lever to loosen the bolt.
How to stop a drill from moving off center?
Flatten and smooth the surface at the end of the broken bolt with sandpaper or a grinder to prevent the drill from moving off center.
What is the shank on a bolt called?
Underneath the head, which can be hexagonal or cylindrical (socket cap), bolts contain an unthreaded shank, also called the grip length , which joins the threaded portion of the bolt’s length via an area called the runout. A threaded hexagonal nut encircles some of the thread length.
How to adjust plier mouth?
Locate the plier mouth adjustment bolt at the end of the fixed handle. Screw clockwise for smaller objects and counterclockwise to accommodate large objects. Place the jaws on the bolt to size for adjustment. If you squeeze the handles and the jaws don’t lock, you’ll need to make the mouth wider.
Which is better, a pipe wrench or a vise grip?
The Pipe Wrench is better suited for use on pipes and large nuts and bolts, while the Vise grips are better for smaller tasks, such as tightening a pipe to a nut, because it multiplies the force as the handle moves through a much greater distance than the jaws do.
Which is more secure, a pipe wrench or a nut wrench?
As you can see, both tools are used for tightening pipe to a nut, but the Pipe Wrench is more secure.
Why do pipe wrenches tighten?
Pipe wrenches tighten on pipe more securely when they’re turned harder; this is because of the threaded mechanic used by pipes themselves in order not to come loose under pressure.
What wrench to use for hex nut?
Some Wrenches you can use for working with a hex nut and lever would be the adjustable wrench, straight pipe wrench, pliers wrench, chain wrench, crescent wrench, adjustable spanner, mole wrench, socket wrench, chain wrench, and monkey wrench.
How to lock a jaw on a wrench?
Press the lever to lock the jaw and keep these wrenches clamped on your work, leaving your hands free.
What is ultra grip?
Ultra grip is made of hard and soft materials for a more comfortable grip than cushion style.
How many pairs of locking pliers are needed for a table holder?
Secure these holders to a table or benchtop and slide in up to three pairs of locking pliers to create a hands-free way to hold your work.
When do pliers release open?
Pliers with lever release open when you press the lever.
Do you hold the strap on a wrench?
While some wrenches require you hold the strap, these have a shackle that keeps the strap closed for extra turning force and quick adjustment. They're nonmarring and grip plastic pipe, tubing, hand wheels, filters, and objects with highly polished surfaces.
