Chambers 20th Century Dictionary (0.00 / 0 votes) Rate this definition:
- Vice Vise, vīs, n. an iron or wooden screw-press, fixed to the edge of a workboard, for holding anything tightly while being filed, &c.: ( Shak.) a grip, grasp.— v.t. ...
- Vice vīs, n. ...
- Vice vīs, prep. ...
What is a vice used for?
Vise, also spelt Vice, device with two parallel jaws for holding a workpiece; one jaw is set in place, while the other is moveable by a screw, lever, or cam. When a vise is used to secure a workpiece during manual activities such as filing, hammering, or cutting, it may be securely fastened to a bench.
What is a good vise for AR work?
- Brownell’s AR-15 armorer’s wrench
- A lower receiver vise block
- An upper receiver action vise block
- Two pivot pin tools
- A pin punch for your bolt catch
How to use vise in a sentence?
Vise sentence examples:1.the tube should be cut to desired length with a square cut, preferably in a square-end sawing Vise.2.the slot was like a Vise holding her head in one position.3.the wood is held in position by a clamp. grip a piece of wood in a Vise4.thai type pipe wrench with double-curved handle clamped as
How to attach a vise to a drill press?
How to attach a Vise to a Drill Press
- Place the drill vice press atop the table of the drill press.
- Align the holes on the drill press vise with holes on the drill press table.
- Slide a 3/8 washer over 3/8 inch bolt and gently inch this through the hole aligned on the drill press table.
- Rotate the drill press vise to align another hole with the drill press table. ...
How does a vice work?
A vice has two parallel jaws which work together to firmly clamp an object and hold it in place. One jaw is stationary, as it is attached to the fixed body section of the vice, while the other jaw is moveable.
When should you use a vise?
A bench vise is an essential and integral tool used in metalworking, woodworking, and some other manufacturing applications. It is mounted on workbenches and its main function is to hold the workpiece safely and securely.
What is the function of a vice clamp?
Vice grips are the extra set of hands every DIYer needs. The locking feature allows them to be clamped tight and stay that way while you make a cut, measurement or free a stripped bolt.
What is a vice used for in carpentry?
A woodworking vice is a type of vice primarily designed to solidly clamp wood without damaging the surface. Wood often needs to be clamped when completing tasks such as sawing, drilling or carpentry.
Do I need a vise for woodworking?
The sturdy engineer's vise is essential for anyone who works with metal—which includes almost every woodworker, by the way, when it comes to sharpening, and dealing with all sorts of hardware and other components. Each vise has some specialized advantages, but you'll have to make the call.
What vise do I need?
For general household DIY, a 4- to 5-inch vise is large enough to handle most tasks. (This measurement is the length of the jaws from end to end and is maximum amount of contact your vise has with the workpiece.)
What are some common vices?
Seven Examples of Common Human VicesAnger. While not all anger is an example of vice, the type of anger that leads to hatred, a deeply-held desire for revenge, or extreme resentment against others falls into the category of vice. ... Arrogance. ... Envy. ... Gluttony. ... Greed. ... Lust. ... Sloth.
What's the difference between a vice and a clamp?
Vises function similarly to clamps, but they usually have larger contact areas. A vise features two sides, or jaws, one of which is fixed and one of which travels along a guide rod or bar. A handle is used to turn a threaded rod, which in turn causes the moveable side to slide back and forth.
What can you do with a vice?
A vice is a tool used to hold objects securely while they are worked on. A vice can be used to hold large and heavy objects as its jaws have a grip that can exert considerable pressure.
Why do I need a bench vise?
The primary function of any vise is to hold an object safety and securely so that it can be worked on. Bench vises make work such as sanding, finishing, chipping, sawing, and welding easier by freeing the operator's hands to perform the needed task.
Do I need a vise on my workbench?
A workbench is only a success if it can keep itself still and provide means to hold your work. A woodworking vice is not an essential feature of this. Typically though we can expect to see two vices on a workbench today. One will be installed on the front of the bench, towards the left.
Why do I need a bench vise?
The primary function of any vise is to hold an object safety and securely so that it can be worked on. Bench vises make work such as sanding, finishing, chipping, sawing, and welding easier by freeing the operator's hands to perform the needed task.
When not in use a bench vise should be left with?
46. Bench vises not in use should be left loose with the handle in a vertical orientation. This will prevent injury to those walking past the workbench.
What does it mean when someone has a vice?
Definition of vice (Entry 1 of 4) 1a : moral depravity or corruption : wickedness. b : a moral fault or failing. c : a habitual and usually trivial defect or shortcoming : foible suffered from the vice of curiosity.
Why should you use safety glasses when using a vise?
#2) Wear Safety Glasses The powerful clamping action of a vise can create shrapnel that shoots out from between the jaws. By wearing safety glasses, you can rest assured knowing that your eyes will be protected from this shrapnel.
What is a vise used for?
Woodworking Vises. The type of vise most commonly used as a woodworking vise is the bench vise. It consists of several components. The elements of the vise responsible for holding a workpiece are called jaws. A set of jaws, one fixed and one moving parallel to the other, secures the workpiece with a screw mechanism, ...
What is a metalworking vise?
Metalworking vises, also called engineer’s vises, hold pieces of metal in place instead of wood, in order to file and cut them. These vises are sometimes made of cast steel but are mainly made of cast iron. Some have a cast iron body with a steel channel bar. Cast iron is a popular material to use because it is rigid, strong, and inexpensive.
What is a heavy duty bench vise?
Heavy-duty bench vises are frequently made from iron so that they can withstand heavier applications and frequent use, and are sometimes referred to as machinists’ vices. The featured components include serrated steel jaws, precision slide bar, and an ACME-threaded main screw. Fasteners should be purchased, and fasteners for attaching the jaws to the vise will often include an additional set of replacement jaws, to be installed when the first set wears out. A typical heavy-duty bench vise will either be stationary or feature a 360-degree swivel. Bench vises with pipe jaws feature a secondary set of steel pipe jaws, which also rotate 360 degrees and are replaceable.
How does a chain pipe vise work?
Chain vises use a chain to secure the pipe. The pipe is held in a V-shaped support by a chain that clamps tightly around the pipe. The chain is usually made of high-tensile steel. Chain pipe vices work well with irregularly shaped pipes or other objects. In comparison to hinged vices, they tend to have a larger working range and capacity because only the length of its chain limits the working range of the vice. The large clamping surface of the chain means that the entire circumference of the pipe can be gripped securely. However, securing a pipe in place with a chain pipe vice takes more time than other vises. This is because the chain must be carefully threaded between the jaws of the tool to clamp the pipe firmly in place.
Why does a chain pipe vice take more time to secure?
This is because the chain must be carefully threaded between the jaws of the tool to clamp the pipe firmly in place.
What is a bench vise?
A vise, a common mechanical device that is used to hold a workpiece stationary, is an integral tool in many woodworking, metalworking, and other manufacturing applications. Bench vises (or workbench vice/vise), in particular, attach directly to a workbench to hold the workpiece during operations such as sawing, planing, and drilling.
Why are hinged vices larger than hinged vices?
In comparison to hinged vices, they tend to have a larger working range and capacity because only the length of its chain limits the working range of the vice. The large clamping surface of the chain means that the entire circumference of the pipe can be gripped securely.
What is a vise in woodworking?
A woodworking vise, according to its dictionary definition, consists of two jaws for holding work and a mechanism, usually a screw device, that opens and closes those jaws. That’s a rather broad definition, but then vises are a rather diverse lot. For convenience, vises are loosely categorized by the position on the woodworking bench they usually ...
What are the parts of a vise?
The vise’s constituent parts include a pair of iron jaws, while its other components—its slides, drive, screw, and handle—are usually steel. Like wooden face vises, the inner jaw is fixed, while the outer jaw is operated by turning the handle centered on the front of the tool. Clockwise motion will tighten the screw mechanism, ...
What is the end vise on a bench?
Built into the end of a bench (almost always the right-hand end), the end or tail vise, as it is also called, can be used to clamp workpieces to the bench between its jaws. The flush-mounted end vise uses the benchtop as the inside jaw, and the bench screw drives the movable jaw tight against it.
What is the clockwise motion on a bench?
These vises are usually located over or near a leg (to avoid putting unnecessary force on the benchtop ) and are fastened with lag screws or carriage bolts.
Where are the vises on a woodworking bench?
Woodworker’s vises are designed to be attached to the underside of the front of a woodworking bench. The vise’s constituent parts include a pair ...
How wide is a woodworker's vise?
Woodworker’s vises come in almost any size, with jaws ranging from six inches wide to ten inches or more, with a maximum opening capacity ranging from roughly four to as many as fifteen or more inches. The size you need depends upon the size of the stock you will be likely to use for most of your projects. Advertisement.
What is a dog hole in a vise?
It is distinguished from other vises in that a rectangular hole is cut into its top, and that hole is aligned with a series of other holes along the front of the benchtop. A workpiece to be shaped or cut is set along the front of the bench, flush to a bench dog set into the “dog-hole” in the vise.
What is a vise?
The word vise is also used figuratively to refer to something that is like a vise in the strength of its hold, such as "a vise of debt.". Vise is a little younger; it dates to the early 16th century. It too traces back to Latin (to the word vitis, meaning "vine"), and entered the language by way of Anglo-French.
What is vice and vise?
It's gripping stuff, really. Vice is the more common of this pair. Often contrasted with virtue, vice is used to refer to a variety of inadvisable acts and behaviors, from the merely blush-inducing to the truly scandalous.
Where did the word "vise" come from?
The word is Latin in origin, tracing back to the word vitium, meaning "fault, vice.". It entered English by way of Anglo-French during the 14th century. The word vise is another thing entirely. It refers to a tool with two jaws for holding something. The jaws can be closed, usually by a screw, lever, or cam. A vise is handy, for example, ...
What are the responsibilities of a vice president?
Aside from breaking tie votes in the Senate and stepping in when the president can’t fulfill his responsibilities, vice presidents have developed these new responsibilities: 1 They lead commissions and other efforts on particular topics as a way for the president to show focus on that area. Al Gore, for instance, led a “reinventing government” effort for President Bill Clinton. 2 They travel abroad, especially when the president isn’t ready to commit to some sort of deal with another country but wants to send a high-level emissary. 3 They serve as advisers whose loyalties are clearly to the president and not other groups.
What was the role of the first vice president?
The Constitution gives the vice president the tie-breaking power in the U.S. Senate and a role as the chief presiding officer there, so the first American vice presidents spent most of their time there. “For most of the 19th century, the vice president was primarily a legislative position and presided over the Senate as a full-time occupant,” said Joel K. Goldstein, emeritus professor at the Saint Louis University School of Law and an expert on the vice presidency.
Who was the vice president of the United States when the atomic bomb was made?
His vice president, Harry Truman, had to be pulled aside and told of the country’s secret plan to build an atomic bomb. “Carter thought it was simply appalling to have the person (who was) a heartbeat away not be up to speed,” Goldstein said.
Who chose Rockefeller as the Vice President?
Gerald Ford, who chose Rockefeller, illustrated just how important vice presidents can be when he moved into the top job. Vice President Nelson Rockefeller, left, and President Gerald Ford confer in the Oval Office in the White House in 1974. (© AP Images)
Is the Vice President a major understudy?
The American vice president in recent administrations could be called a major understudy for the president. The expanded role of the federal government makes having a capable successor more important than it was at the country’s dawn, Goldstein said.
What are the skills of a vice president?
Vice President Skills & Competencies 1 Communication skills: This career involves a great deal of writing, speaking, and other communication skills. Superior editing skills are a plus as well, so every report you issue is clear and flawless. 2 Innovation: You'll need the insight and creativity to form campaign strategies that work. 3 Public speaking skills: You'll often find yourself speaking in front of groups, even if the group is comprised of your own staff. 4 Interpersonal skills: These skills are required to manage and guide staff and teams.
What is the role of VP?
A vice president's role starts with the fundamental job responsibilities of a manager. These are the basic oversight responsibilities of anyone in an organization that functions as a manager and has staff members reporting to them.
What is the differential of VP?
The differential for the role of VP is that the top boss can assign other new, unforeseen responsibilities that will ultimately help the organization achieve success. There might be multiple VPs.
What are the skills required to become a vice president?
Vice President Skills & Competencies. You should possess several essential qualities to succeed at becoming vice president of an organization. Communication skills: This career involves a great deal of writing, speaking, and other communication skills.
What is the job of an executive leader?
Lead, guide, direct, and evaluate the work of other executive leaders, including assistant vice presidents, senior directors, and managers.
How much does a VP make?
Salaries for all chief executives overall can range from approximately $68,000 to $208,000, depending on additional compensation and benefits.
What is a VP job?
Work Environment. A VP can be responsible for several departments within an organization, so this can be a diversified job. You might be tied to one desk, but find that you're dealing with a director of sales in the morning and a director of marketing later in the day.
What size bench vise should I buy?
With all of that as a background, I’ll offer up what I tell most folks when they’re trying to decide the appropriate bench vise size. Assuming we’re talking about a quality vise, most people never need more than a 4.5″ jaw model. I’ve noticed that most welding and fabrication shops seem to buy 4.5″ and 5″ models because that’s big enough. If you’re working on heavy equipment or big trucks, a 5″ or larger model might make sense, but there is one major consideration with the big vises you’ll want to take into account, and that is height.
How much does a Bessey 6 inch vise weigh?
Home Depot offers a Bessey 6″ vise on a swivel base that weighs 44lbs. It opens 6″ and has a throat depth of 3″. That’s a pretty typical big box store vise, and is actually on the large side of what they normally offer. If you only have a Lowe’s nearby, they offer an Irwin 6″ mechanic’s vise that has very similar specs (6″ opening and 3″ throat depth) but only weighs 31lbs.
What size jaw is a Wilton machinist vise?
Since a picture is worth a thousand words, I managed to stage a lineup of Wilton machinist vises that only missed two sizes, the 2.5″ jaw and 8″ jaw models. The vintages vary a little bit between the models, but the oldest is from the 1967 (the 2″ baby) and the newest is a recent production model (the 5″). Generally speaking, the new versions are slightly larger and heavier than the older versions, but the changes weren’t all that drastic and don’t alter the overall concept.
.jpg)