A tail vise’s main purpose is to hold a board flat on the bench for planing, routing, sanding and so on. The tail vise pushes a board tightly against a bench dog so the board can’t swivel or move. The bench dog fits in a series of holes cut in the top to accommodate different sizes of boards.
How does a tail vise work?
It has one large control screw, and its moveable wooden jaw has a series of bench dog holes along the top that line up with the front row of dog holes on the bench. The alignment of these bench dog holes enables a tail vise to secure workpieces or panels that would be too long to clamp across the benchtop using a front vise and dogs.
Where do you mount a tail vise?
Chris Marshall: A tail vise is usually mounted on the right-hand end of a workbench with a jaw that notches into the corner of the benchtop. It has one large control screw, and its moveable wooden jaw has a series of bench dog holes along the top that line up with the front row of dog holes on the bench.
Do you use a tail vise on your Workbench?
My workbench doesn't have a traditional tail vise. I have a twin-screw vise on the end instead. It stretches across the full end of my bench and doesn't notch into the benchtop. But I use it the same way as I would a tail vise - to clamp long workpieces or large panels to the benchtop or to secure pieces like rails and stiles vertically.
Should I buy a face or tail vise?
And the engineer’s vise traditionally is set neither on the face nor on the tail of the bench, but actually on the benchtop. The bottom line? Most woodworkers will find a face vise invaluable; almost as many would quickly learn to love the advantages of a tail vise if they don’t already.
Is a tail vise necessary?
The main reason why a traditional tail vise is so darn useful is because of the unobstructed gap you get in the front of your bench. this gives you the perfect way to solidly clamp chair legs, or any long part that needs to be held while you work on it from one end.
What is a modern tail vise?
Chris Marshall: A tail vise is usually mounted on the right-hand end of a workbench with a jaw that notches into the corner of the benchtop. It has one large control screw, and its moveable wooden jaw has a series of bench dog holes along the top that line up with the front row of dog holes on the bench.
How do you fit a tail vice?
0:396:58How to Install a Tail Vise to your Workbench | HNT Gordon & Co.YouTubeStart of suggested clipEnd of suggested clipIf you don't have dogs on your bench. We recommend 75 millimeters from the center line of your dogsMoreIf you don't have dogs on your bench. We recommend 75 millimeters from the center line of your dogs to the edge of the bench we find works really well. There are pros and cons for that measurement.
How do you make a workbench tail vise?
0:149:10I Built a Secret Tail Vise into my Workbench - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing i need to do is get this tabletop. Taken off and see just how i'm going to be ableMoreThe first thing i need to do is get this tabletop. Taken off and see just how i'm going to be able to mount this unit to the subframe of the table. Let's get started doing.
What kind of vise should I get?
For general household DIY, a 4- to 5-inch vise is large enough to handle most tasks. (This measurement is the length of the jaws from end to end and is maximum amount of contact your vise has with the workpiece.)
What is an end vise used for?
Typically, the primary function of an end vise is to hold material flat on the surface of the bench, pinched between one or more "dogs" sticking up from the top surface of the vise's jaw and corresponding dogs fitted into holes in the bench surface.
How does a wagon vise work?
8:149:07$24 Wagon Vise - YouTubeYouTubeStart of suggested clipEnd of suggested clipReally really well the main point of a wagon vise is to be able to clamp laterally. On the ends ofMoreReally really well the main point of a wagon vise is to be able to clamp laterally. On the ends of the boards.
How do you install a Yost tail vise?
1:1419:20New Front Vise | Installing a Yost 10" Vise and Making a Handle - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the first thing that we need to do is go ahead and get this base plate separated. And we're gonnaMoreSo the first thing that we need to do is go ahead and get this base plate separated. And we're gonna have to take the cotter pin out of this end as.
What is a shoulder vise?
A shoulder vise is a tool that holds an object in place while it is being worked on. This type of vise is built onto the side of a workbench, which makes it a relatively strong and stable type of vise.
Do I need a woodworking vise?
The sturdy engineer's vise is essential for anyone who works with metal—which includes almost every woodworker, by the way, when it comes to sharpening, and dealing with all sorts of hardware and other components. Each vise has some specialized advantages, but you'll have to make the call.
What is leg vice?
The leg vise can be visualized as a giant wooden hand screw clamp placed vertically . This form of vise probably evolved from the blacksmith's iron post vise. Leg vises typically use the left front leg of the bench as the rear jaw of the vise.
How do you build an end vise?
0:003:52Quick Release End Vise Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipI then headed over to my miter saw and cut them to roughly. Before running the board's through theMoreI then headed over to my miter saw and cut them to roughly. Before running the board's through the jointer and planer to surface them next I took them to the table saw and rip the board.
What is a Woodworkers vise used for?
The primary purpose of a machinist's vise is to grab hold of things and to hold them steady in its rough jaws, freeing up both your hands so that you can bend, shape, hammer, cut, drill, or perform any number of other operations. The jaws of the vise usually have a machined face that can easily scar wood.
What is the usefulness of a vice in the process of cutting wood?
Bench vices, also known as woodworking or engineer's vices, are usually a tool made of metal or wood. Their sole purpose is to hold the object underneath, with grip and thereby work on the object. Simple examples of such works could be planning, drilling and sawing.
How do I choose a woodworking vise?
7:0312:00Pick the RIGHT vise for woodworking. - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey make your bench more expensive. And time consuming to build because you're buying a second viceMoreThey make your bench more expensive. And time consuming to build because you're buying a second vice. And it really needs to be quick release your tail vise needs a dog built into the jaw.
What is a pattern vise?
Your Pattern Maker's Vise is designed to hold any object, from those with parallel sides to those with tapers or even double tapers. To hold tapered objects, you will need the tilting plate which fits into the vice's back jaw using a ½” dog hole. If holding parallel objects this tilting plate is not required.
Where is the perfect place to place a tail vise?
Perfect position. The front edge of my torsion-box benchtop is the perfect location for a tail vise with a movable dog.
What is a simple backsaw?
Quickly defined. A simple backsaw makes it quite easy to cut the outlines for the cavity into which the nut will go.
How thick is a tail vise?
The Benchcrafted Tail Vise was first conceived to meet the needs of a Roubo-style workbench with a top at least 4" thick, though it can also be installed on thinner benchtops and can be retrofitted to an existing bench.
Where are tail vises made?
Benchcrafted offers three options for the handwheel of the Tail Vise. Both are completely designed and manufactured in the USA. Machined — This handwheel is fully machined and features a black wrinkle coated aluminum knob. Cast — This handwheel has a retro rough-cast look and features a black wrinkle coated aluminum knob.
What is a benchcrafted tail vise?
Benchcrafted Tail Vise. The Benchcrafted Tail Vise is the original flagship of the award-winning Benchcrafted line of workbench hardware. Besides being extremely robust with absolutely precise machining, this vise's real claim to fame lies in its incredibly smooth and effortless operation.
How many lag screws are needed for tail vise end cap?
We offer a Set of five Spax Lag Screws for installation of the Tail Vise End Cap. These are the screws recommended by Spax for this purpose. (See pages 8-10 of the installation instructions below.) We strongly recommend them for this application.
Why use a tail vise?
The main reason why a traditional tail vise is so darn useful is because of the unobstructed gap you get in the front of your bench. this gives you the perfect way to solidly clamp chair legs, or any long part that needs to be held while you work on it from one end.
Do workbench workbenchs use tail vises?
In the past few years there has been an explosion in workbench design and fitting. However most modern workbenches don't use a traditional tail vise, they usually use some version of a face vise just at the end of the workbench, or some sort of wagon vise. Lee Valley just introduced a mini-wagon vise. While these approaches allow you ...
Can you clamp a tail vise?
In my case the tail vise also has dog holes so I can easily clamp boards over seven feet long, longer than my bench, and have them supported all along the underside, except for a small gap. With a end mounted face vise you just don't get that kind of support. Wagon vises do give you that kind of support but without allowing you to extend the clamping length past the length of the bench.
Is a tail vise made of wood?
My tail vise was made completely out of wood, the mechanism isn 't perfect - but it works well enough. In fact when it comes to real work I use it a lot more than my face vise.
Is a tail vise a frame?
On a traditional tail vise it's not really an "L", it's a frame but part of it is under the bench top. One side of that rectangular frame is the top of the vise and it provides resistance to racking. It's actually a pretty rigid and strong structure. 12/20/2010 Mark Salomon.
Can you secure work to a bench without a wagon vise?
There are plenty of other ways to secure work to the surface of a bench without using a wagon vise. The wagon vises are nice, but they would be even nicer if they were a third of the way up the bench and had a detachable wheel that faced out of the front of the bench perpendicular to the travel of the vise.
Can you use a double screw vise on a bench?
For regular clamping of long boards all a double screw vise at the end of the bench does it give you two threads that can bind and if a piece of wood or wide panel is not going to move around the bench with a single threaded vise, two threads don't add anything.
What are the parts of a vise?
The vise’s constituent parts include a pair of iron jaws, while its other components—its slides, drive, screw, and handle—are usually steel. Like wooden face vises, the inner jaw is fixed, while the outer jaw is operated by turning the handle centered on the front of the tool. Clockwise motion will tighten the screw mechanism, ...
What is a vise in woodworking?
A woodworking vise, according to its dictionary definition, consists of two jaws for holding work and a mechanism, usually a screw device, that opens and closes those jaws. That’s a rather broad definition, but then vises are a rather diverse lot. For convenience, vises are loosely categorized by the position on the woodworking bench they usually ...
What is the end vise on a bench?
Built into the end of a bench (almost always the right-hand end), the end or tail vise, as it is also called, can be used to clamp workpieces to the bench between its jaws. The flush-mounted end vise uses the benchtop as the inside jaw, and the bench screw drives the movable jaw tight against it.
What is the clockwise motion on a bench?
These vises are usually located over or near a leg (to avoid putting unnecessary force on the benchtop ) and are fastened with lag screws or carriage bolts.
Where are the vises on a woodworking bench?
Woodworker’s vises are designed to be attached to the underside of the front of a woodworking bench. The vise’s constituent parts include a pair ...
How wide is a woodworker's vise?
Woodworker’s vises come in almost any size, with jaws ranging from six inches wide to ten inches or more, with a maximum opening capacity ranging from roughly four to as many as fifteen or more inches. The size you need depends upon the size of the stock you will be likely to use for most of your projects. Advertisement.
What is a dog hole in a vise?
It is distinguished from other vises in that a rectangular hole is cut into its top, and that hole is aligned with a series of other holes along the front of the benchtop. A workpiece to be shaped or cut is set along the front of the bench, flush to a bench dog set into the “dog-hole” in the vise.