What's the proper way to mount a vise?
Mounting Your Bench Vise
- First, measure where you need to place the mounting holes and mark them with your pencil. ...
- Next, you are going to want to choose the correct size of drill bit. Drill out the holes you marked with your pencil.
- Now you check if the washers will fit. ...
What is a vice used for?
Vise, also spelt Vice, device with two parallel jaws for holding a workpiece; one jaw is set in place, while the other is moveable by a screw, lever, or cam. When a vise is used to secure a workpiece during manual activities such as filing, hammering, or cutting, it may be securely fastened to a bench.
How to use "vise" in a sentence?
Vise sentence examples:1.the tube should be cut to desired length with a square cut, preferably in a square-end sawing Vise.2.the slot was like a Vise holding her head in one position.3.the wood is held in position by a clamp. grip a piece of wood in a Vise4.thai type pipe wrench with double-curved handle clamped as
What does vise stand for?
VISE: Volunteers for Isolated Students' Education (Australia) VISE: Venus In-Situ Explorer (US ...
What is the meaning of vised?
vised; vising. Definition of vise (Entry 2 of 4) transitive verb. : to hold, force, or squeeze with or as if with a vise.
What is the difference between vice and vise?
Usage Notes. "In American English, a vice is an immoral habit or practice, and a vise is a tool with closable jaws for clamping things. But in British English, the tool is spelled like the sin: vice."
What is the example of vise?
Vise definition An example of vise is for a bad headache to squeeze someone's head with pain and pressure. The definition of a vise, an alternative spelling for vice, is a tool to grip something firmly as it is worked on. An example of a vise is a tool on a workbench holding a piece of wood that is being sanded.
Why is it called a vise?
The word is Latin in origin, tracing back to the word vitium, meaning "fault, vice." It entered English by way of Anglo-French during the 14th century. The word vise is another thing entirely. It refers to a tool with two jaws for holding something. The jaws can be closed, usually by a screw, lever, or cam.
What is a human vice?
There are many vices. Some of the most commonly referred to vices include greed, anger, lust, envy, gluttony, pride, and sloth (laziness). Each of these is a character trait we find in people which is, on the whole, undesirable.
How do you use the word vise in a sentence?
Use “vise” in a sentence | “vise” sentence examples. (1) He usually has a cigar vised in his teeth. (2) He carefully places the sliver into a miniature vise. (3) More than 400 the vise of these educational advising centers are located around the world.
What is the synonym of vice?
Some common synonyms of vice are crime, offense, scandal, and sin. While all these words mean "a transgression of law," vice applies to a habit or practice that degrades or corrupts.
What are vices made of?
It is sometimes made of cast steel or malleable cast iron, but most are made of cast iron. The jaws are often separate and replaceable, usually engraved with serrated or diamond teeth. Soft jaw covers made of aluminum, copper, wood (for woodworking) or plastic may be used to protect delicate work.
What are the type of vices?
Types of VicesBench Vice.Pipe Vice.Tool Makers Vice.Hand Vice.Leg Vice.Drill vice.Pin Vice.
Does everyone have a vice?
Everyone has, or has had, or will have a vice or vices. Likewise, everyone has been, is being or will be affected by others because of their vice or vices. How we cope, how others cope, how people work on themselves, how successful they are in efforts to change...these are all part of life and being human.
Why do we have vices?
Although these behaviors aren't always harmful in small doses, they often become habitual because of peer pressure, new found independence or a desire to experiment.
Is it bench vise or vice?
vise, also spelled Vice, device consisting of two parallel jaws for holding a workpiece; one of the jaws is fixed and the other movable by a screw, a lever, or a cam. When used for holding a workpiece during hand operations, such as filing, hammering, or sawing, the vise may be permanently bolted to a bench.
Which is correct vise versa or vice versa?
We've used italics for vice versa in this post because we're talking about the term itself, but in ordinary use there's no need to italicize it or to enclose it in quotation marks. There's also no need to hyphenate it—it's always written as two separate words. You don't need to capitalize it, either.
Is it vise grip or vice grip?
Locking pliers (also called Vise-Grips, a vice grip, or a Mole wrench) are pliers that can be locked into position, using an "over-center" cam action.
What is the correct spelling of vice?
'Vice' is the correct spelling, though, for all other definitions: US English: His worst vice is drinking. US English: We need to call the vice president.
What is a vise?
A vice or vise ( American English) is a mechanical apparatus used to secure an object to allow work to be performed on it. Vises have two parallel jaws, one fixed and the other movable, threaded in and out by a screw and lever . Light duty homeowner's vise holding a brass check valve.
What is an engineer's vise?
An engineer's vise, also known as a metalworking vise or machinist 's vise, is used to clamp metal instead of wood. It is used to hold metal when filing or cutting. It is sometimes made of cast steel or malleable cast iron, but most are made of cast iron. However, most heavy duty vises are 55,000 psi cast steel or 65,000 psi ductile iron. Some vises have a cast iron body but a steel channel bar. Cast iron is popular because it is typically 30,000 psi grey iron which is rigid, strong and inexpensive. The jaws are often separate and replaceable, usually engraved with serrated or diamond teeth. Soft jaw covers made of aluminum, copper, wood (for woodworking) or plastic may be used to protect delicate work. The jaw opening of an engineer's vise is almost always the same size as the jaw width, if not bigger.
What is a vise made of?
Woodworker's vise with entirely wooden jaws. Woodworking vises are attached to a workbench, typically flush with its work surface. Their jaws are made of wood or metal, the latter usually faced with wood, called cheeks, to avoid marring the work. The movable jaw may include a retractable dog to hold work against a bench dog .
What are the different types of vises?
Other kinds of vise include: 1 Hand vise 2 Compound slide vise; a more complex machine vise. They allow speed and precision in the placement of the work. 3 Cross vise, which can be adjusted using leadscrews in the X and Y axes; these are useful if many holes need to be drilled in the same workpiece using a drill press. Compare router table. 4 Off-center vise 5 Angle vise 6 Sine vise, which use gauge blocks to set up a highly accurate angle 7 Rotary vise 8 Suction vise 9 Diemakers' vise 10 Saw vise – used for sharpening hand saws 11 Pin vise (for holding thin, long cylindrical objects by one end, or used as a drill (scale modeler's pin vise)) 12 Jewellers' vise 13 Fly tying vise, used to secure fishing hook in fly tying 14 Leg vise, which is attached to a bench but also supported from the ground so as to be stable under the very heavy use imposed by a blacksmith's work 15 Trailer hitch vise 16 Shaker broom vise 17 Rigging vise, otherwise known as a triangle vise or splicing vise, which has three jaws. Used to close thimbles and splice rope, cable, and wire rope. 18 Fractal vise, used to hold workpieces with complex forms
What is a combination vise?
A combination vise combines an engineer-style vise with a subsidiary set of curved serrated jaws below the main for clamping pipe. A pivoting base is standard.
What is a rigging vise?
Rigging vise, otherwise known as a triangle vise or splicing vise, which has three jaws. Used to close thimbles and splice rope, cable, and wire rope.
What is a vacuum mounted vise?
A vacuum-mounted vise is a small engineer's vise secured by a suction cup base and used by hobbyists for very light duty work. No pivot.
What is a vise?
Alternative Title: vice. Vise, also spelled Vice, device consisting of two parallel jaws for holding a workpiece; one of the jaws is fixed and the other movable by a screw, a lever, or a cam. When used for holding a workpiece during hand operations, such as filing, hammering, or sawing, the vise may be permanently bolted to a bench.
What is a vise in woodworking?
Woodworking vises have smooth jaws, often of wood, and rely on friction alone rather than on serrations. Bench vise. The workbench and vise form an organic unit, for the vise is a fixture that is either part of the carpenter’s bench or is attached to the...
What are the jaws on a vise made of?
In vises designed to hold metallic workpieces, the active faces of the jaws are hardened steel plates, often removable, with serrations that grip the workpiece; to prevent damage to soft parts, the permanent jaws can be covered with temporary jaws made from sheet copper or leather.
What is a tool?
tool, an instrument for making material changes on other objects, as by cutting, shearing, striking, rubbing, grinding, squeezing, measuring, or other processes. A hand tool is a small manual instrument traditionally operated by the muscular strength of the user, and a machine tool is a…
What is a vise used for?
Woodworking Vises. The type of vise most commonly used as a woodworking vise is the bench vise. It consists of several components. The elements of the vise responsible for holding a workpiece are called jaws. A set of jaws, one fixed and one moving parallel to the other, secures the workpiece with a screw mechanism, ...
What is a bench vise?
A vise, a common mechanical device that is used to hold a workpiece stationary, is an integral tool in many woodworking, metalworking, and other manufacturing applications. Bench vises (or workbench vice/vise), in particular, attach directly to a workbench to hold the workpiece during operations such as sawing, planing, and drilling.
What is a heavy duty bench vise?
Heavy-duty bench vises are frequently made from iron so that they can withstand heavier applications and frequent use, and are sometimes referred to as machinists’ vices. The featured components include serrated steel jaws, precision slide bar, and an ACME-threaded main screw. Fasteners should be purchased, and fasteners for attaching the jaws to the vise will often include an additional set of replacement jaws, to be installed when the first set wears out. A typical heavy-duty bench vise will either be stationary or feature a 360-degree swivel. Bench vises with pipe jaws feature a secondary set of steel pipe jaws, which also rotate 360 degrees and are replaceable.
How does a chain pipe vise work?
Chain vises use a chain to secure the pipe. The pipe is held in a V-shaped support by a chain that clamps tightly around the pipe. The chain is usually made of high-tensile steel. Chain pipe vices work well with irregularly shaped pipes or other objects. In comparison to hinged vices, they tend to have a larger working range and capacity because only the length of its chain limits the working range of the vice. The large clamping surface of the chain means that the entire circumference of the pipe can be gripped securely. However, securing a pipe in place with a chain pipe vice takes more time than other vises. This is because the chain must be carefully threaded between the jaws of the tool to clamp the pipe firmly in place.
Why does a chain pipe vice take more time to secure?
This is because the chain must be carefully threaded between the jaws of the tool to clamp the pipe firmly in place.
How big is a pipe stand?
They can hold pipes as small as 3 mm in diameter, or as large as 200 mm. They may be fitted onto a workbench or used with a mobile tripod stand. A stand is generally used for projects that take place outside of a workshop. They are foldable for transportation, and sometimes two or more are used for long lengths of pipe.
What is a metalworking vise?
Metalworking vises, also called engineer’s vises, hold pieces of metal in place instead of wood, in order to file and cut them. These vises are sometimes made of cast steel but are mainly made of cast iron. Some have a cast iron body with a steel channel bar. Cast iron is a popular material to use because it is rigid, strong, and inexpensive.
What is a vise?
The word vise is also used figuratively to refer to something that is like a vise in the strength of its hold, such as "a vise of debt.". Vise is a little younger; it dates to the early 16th century. It too traces back to Latin (to the word vitis, meaning "vine"), and entered the language by way of Anglo-French.
What is vice and vise?
It's gripping stuff, really. Vice is the more common of this pair. Often contrasted with virtue, vice is used to refer to a variety of inadvisable acts and behaviors, from the merely blush-inducing to the truly scandalous.
Where did the word "vise" come from?
The word is Latin in origin, tracing back to the word vitium, meaning "fault, vice.". It entered English by way of Anglo-French during the 14th century. The word vise is another thing entirely. It refers to a tool with two jaws for holding something. The jaws can be closed, usually by a screw, lever, or cam. A vise is handy, for example, ...
What does "vice" mean in the dictionary?
also vice (vīs) n. A heavy clamp, usually mounted on a workbench and operated by a screw or lever, used in carpentry or metalworking to hold a piece in position. tr.v. vised, vis·ing, vis·es also viced or vic·ing or vic·es. To hold or compress in or as if in a vise.
Can a man move in a vise of iron?
As he had been held in a mighty vise of iron he could not move.
What is a vise in woodworking?
A woodworking vise, according to its dictionary definition, consists of two jaws for holding work and a mechanism, usually a screw device, that opens and closes those jaws. That’s a rather broad definition, but then vises are a rather diverse lot. For convenience, vises are loosely categorized by the position on the woodworking bench they usually ...
What are the parts of a vise?
The vise’s constituent parts include a pair of iron jaws, while its other components—its slides, drive, screw, and handle—are usually steel. Like wooden face vises, the inner jaw is fixed, while the outer jaw is operated by turning the handle centered on the front of the tool. Clockwise motion will tighten the screw mechanism, ...
What is the end vise on a bench?
Built into the end of a bench (almost always the right-hand end), the end or tail vise, as it is also called, can be used to clamp workpieces to the bench between its jaws. The flush-mounted end vise uses the benchtop as the inside jaw, and the bench screw drives the movable jaw tight against it.
What is the clockwise motion on a bench?
These vises are usually located over or near a leg (to avoid putting unnecessary force on the benchtop ) and are fastened with lag screws or carriage bolts.
Where are the vises on a woodworking bench?
Woodworker’s vises are designed to be attached to the underside of the front of a woodworking bench. The vise’s constituent parts include a pair ...
How wide is a woodworker's vise?
Woodworker’s vises come in almost any size, with jaws ranging from six inches wide to ten inches or more, with a maximum opening capacity ranging from roughly four to as many as fifteen or more inches. The size you need depends upon the size of the stock you will be likely to use for most of your projects. Advertisement.
What is a dog hole in a vise?
It is distinguished from other vises in that a rectangular hole is cut into its top, and that hole is aligned with a series of other holes along the front of the benchtop. A workpiece to be shaped or cut is set along the front of the bench, flush to a bench dog set into the “dog-hole” in the vise.
What is a vise for woodworking?
Woodworking vises are a different animal, in that their top surface is flush with the surface of the workbench they are built into, which means they... For woodworkers, metalworkers, jewelers, clockmakers, and even plumbers, a good vise is essential to doing a job right.
What is a vise made of?
While many woodworking vises are made entirely of wooden components, including the screw that is turned to tighten the vise’s wooden jaw to the table, others rely on metal hardware, with the exception of the wooden jaw.
What is bench vise?
Bench vises are often bolted to the surface of a workbench from above or held in place by compression from below. Such vises tend to be used by metalworkers and jewelers, in sizes that correspond to the materials they are working with.
When were parallel vises made?
By 1830, English manufacturers were making parallel vises out of cast iron, which improved their strength over wooden vises in many, but not all, cases. Soon, cast iron and machined metal vises in all shapes and sizes were being produced, each designed for a specific application and need.
Do jewelers use vises?
There are also vises that include a small anvil built just behind the inside jaw —these are sometimes used by jewelers. Woodworking vises are a different animal, in that their top surface is flush with the surface of the workbench they are built into, which means they only need one moving jaw.
What are the features of a bench vise?
There are some bench vises with unique features that set them apart from the competition. Some features to note when making a selection include the anvil, swivel and quick release, but the most critical element is the jaw of your bench vise.
Where is the bench vise located?
The bench vise is installed through its adjustable clamp, located underneath and above the bench top. This method is straightforward and the most common practice found in many fasteners.
What is a Tekton 4 inch bench vise?
The Tekton 4-inch swivel bench Vise is an all-purpose, medium-duty unit that is well suited for the repair of vehicles, assembling of parts as well as all your metalworks. It is a safer unit as compared to the competition, and is engineered to help you work faster and better, knowing that your workpiece is securely in place. The level of confidence you receive from using this unit cannot be experienced with any other brand or model. It is the best bench vise around, and an essential unit your shop or garage cannot function without.
What is a Yost LV-4?
The Yost LV-4 Home Vise is one of the many products that tell the centenary story of the Yost company. With over a hundred years in the production business, Yost is well-known for creating some of the world’s best tools. All items created are launched only after rigorous testing and evaluation, to ensure that they offer nothing but the best of performance to users. Yost prides itself in the creation of quality clamping tools, a passion they have fuelled and perfected over the years. Whenever you decide to purchase a new bench vice for sale, think about the Yost LV-4 Bench Vise before any other model.
What makes a bench vise sand faster?
Sanding: bench vises make the process of sanding quicker by offering stability in times where the pressure is needed.
Why do we use pivots?
Pivots are used to offer users with better access to the objects being worked on, making the process of cutting and sanding easier. Anvil - an anvil is a flat surface added to the bench vise to enable you to work with ease. It is a durable surface that helps users whose jobs involve regular striking of a material.
What is an anvil in a bench?
Anvils protect your tools, materials and workbench from experiencing extreme damage associated with your works. Mount Type - If you're planning to use significant clamping pressure, the mount is an essential feature needed in your bench vise. It is a heavy-duty way of fixing your unit.
