What is a vise in woodworking?
A woodworking vise, according to its dictionary definition, consists of two jaws for holding work and a mechanism, usually a screw device, that opens and closes those jaws. That’s a rather broad definition, but then vises are a rather diverse lot. For convenience, vises are loosely categorized by the position on the woodworking bench they usually ...
How wide is a woodworker's vise?
Woodworker’s vises come in almost any size, with jaws ranging from six inches wide to ten inches or more, with a maximum opening capacity ranging from roughly four to as many as fifteen or more inches. The size you need depends upon the size of the stock you will be likely to use for most of your projects. Advertisement.
What is the end vise on a bench?
Built into the end of a bench (almost always the right-hand end), the end or tail vise, as it is also called, can be used to clamp workpieces to the bench between its jaws. The flush-mounted end vise uses the benchtop as the inside jaw, and the bench screw drives the movable jaw tight against it.
What is the clockwise motion on a bench?
These vises are usually located over or near a leg (to avoid putting unnecessary force on the benchtop ) and are fastened with lag screws or carriage bolts.
Where are the vises on a woodworking bench?
Woodworker’s vises are designed to be attached to the underside of the front of a woodworking bench. The vise’s constituent parts include a pair ...
What is a dog hole in a vise?
It is distinguished from other vises in that a rectangular hole is cut into its top, and that hole is aligned with a series of other holes along the front of the benchtop. A workpiece to be shaped or cut is set along the front of the bench, flush to a bench dog set into the “dog-hole” in the vise.
Where is the engineer's vise on a work bench?
And the engineer’s vise traditionally is set neither on the face nor on the tail of the bench, but actually on the benchtop.
What is a vise in woodworking?
by Wood Critique. A vise is a woodworking tool that woodworkers use for clamping- the holding of pieces of wood during projects such as drilling, wood planning, filing, sanding, or sawing. Usually, the vise is mounted in the front of a workbench. It’s then bolted safely on a workbench to allow for heavy-duty tasks to be carried out without ...
What is a vise handle?
The vise comes with a crank handle that clears work surface when you are opening and closing the jaw on the clamp
What is a yost vise?
The Yost is a great woodworking vise for home as well as a professional woodworker’s use. This tool is constructed using rugged cast iron. One of its amazing features is the quick release mechanism that disengages the screw for a faster adjustment.
How to disengage a vise nut?
All you need to do is a simple pulling of the vise nut lever upward and hold it if you are looking to disengage the vise nut. After that, you can adjust the vise jaws as you want and release the lever. Once the main handle rotates, the vise nut will be engaged, tightening its jaws.
How to use a vise without struggle?
If you are looking for a vise that you can use without so much struggle, you need to go for the ones with a quick-release mechanism. It will allow you to temporarily take the vise off its track and have it close to its final location. You can put it back on its track and turn the handle to make it tight.
How thick is a vise?
The vise allows you the flexibility to mount it on a workbench that measures 2¼ inches thick. Additionally, you can use a shim to install it on a workbench that measures 1½ inches thick. The jaws of this tool come with pre-drilled holes for attaching non-marring jaw pads and protect the surface of your workpieces.
How many locking positions does a 360 degree vise have?
It further comes with the Quick Action Pull pin that gives you room to rotate the vise quickly and with ease. This vise has up to twelve different locking positions. Above all, it features a reinforced anvil and 4 mounting tabs that securely attach it to the Work Bench.
Why is a shoulder vise used?
Because the outer jaw has a tongue that slides in a groove on the fixed arm, it has enough play to let you clamp uneven-shaped workpieces. A shoulder vise gives you floor-to-ceiling clamping space between its jaws. A threaded bushing mortised into the vise shoulder (unseen) keeps the screw on track. Things to know:
What is bench vise?
Think of a bench vise as a tool that’s as essential to your success as a hand plane, router, or tablesaw. Although clamps might substitute in some situations, they tend to get in the way, and a vise gives you freedom to do almost any type of work.
What is a pivoting jaw vise?
The benchtop’s edge or apron typically serves as the inner jaw. A pivoting-jaw vise holds irregular-shape stock without racking the jaws. You also can remove the pivoting jaw for parallel-jaw clamping. Magnet-lined wood jaw pads stay in place without screws. A cast-iron-jaw vise can be recessed into the bottom of a bench for maximum strength ...
How much does a metal vise cost?
Metalworking vises usually mount to the top of a bench. Woodworking vises vary in price from about $30 to as much as $400. Generally, once you decide on a particular style of vise, the more you spend, the better the quality and effectiveness of that vise. Now let’s take a look at the most common types of vises for woodworking.
What is a tail vise?
A traditional tail vise [ Photos H and I] consists of a rectangular or L-shape block of wood (the jaw) fastened to a steel or cast-iron fixture that slides back and forth in a cutaway corner of the bench.
Where do front vises mount?
Front vises. As the name implies, these mount to the front (long edge) of the bench, typically on a left-hand corner. Left-handed folks usually prefer a front vise mounted on the right corner.
Why use woodworking machinery?
By using woodworking machinery in the woodworking avoids the high level of noise and vibration felt during manual operation. Also the finishes are better, resulting in a higher quality of the final product.
What is a jigsaw?
The jigsaw in your home will be one of the most essential cutting and sawing tools. It is indispensable not only for a professional furniture maker, but also for household chores and crafts.
What is a quality tool?
A quality tool or woodworking machine has an appropriate price and guarantee, different from a lower quality woodworking machine.
What is a cordless jigsaw used for?
The jigsaw is mainly used to make curved cuts in plywood, chipboard, fiberboard and similar materials.
What is a miter saw?
The miter saw is a type of circular (circular) saws, the main purpose of this specialized power tool is precise cross-cutting of workpieces. Thanks to the use of a miter saw with a broach, the cut is obtained evenly at the desired angle.
Why is CNC important?
However, CNC technology is very important in 2D woodworking and that is why most CNC woodworking machines are in the panel processing sector. They are used to mill precise and consistent contours in specific panels for a wide range of sizes. #5. Tools for Assembling.
What is the best tool to cut curves?
Jigsaw. You will probably want to cut some curves and a jigsaw is a go-to tool for that purpose. You can also use a band saw, but it is not as maneuverable as a jigsaw. On top of that, the best band saws will command a higher price.
What tool is used to hollow out holes?
A router is another tool that you will find handy. It is used to hollow out holes, dadoes, decorative patterns and cut out fancy edges.
What is the best finish for wood?
Below are some of the basic finished that you will be using most often: 1 Paint – great for long-term durability. 2 Polyurethane – most popular, but application takes a long time as you will need at least 3 layers of it. It also needs sanding between coats. Polyurethane can be oil or water-based. 3 Lacquer – gives a great look to the wood and dries very fast. Lacquer does not require sanding between coats. Can be brushed, sprayed with HVLP or sprayed from a can. Lacquer has a very strong smell so make sure you use a respirator when working with it. Gives the wood a more artificial, plastic-y look. 4 Linseed oil – two layers of linseed oil should be enough. 5 Tung oil – application is much longer as it takes more time to dry than linseed oil and it will need more layers. The upside is that tung oil provides a stronger hydrophobic effect than linseed oil. 6 Danish oil – a middle ground between oil and layer finishes. Offers less protection than a layered finish and gives a more artificial look to the wood than oils.
What is a miter saw?
A miter saw is a good tool to start building basic projects. You will be using a miter saw to make repeatable crosscuts and angle cuts. A compound miter saw will also let you make beveled and compound angle cuts. A miter saw is a very handy tool for furniture making, flooring, remodeling, quick trimming, and general DIY.
What is universal handsaw?
While there are a few variations of handsaws, a universal handsaw will allow you to do both rips and crosscuts.
What is the best saw for ripping plywood?
Circular saw. A good circular saw is essential if you don’t have a table saw and plan on working with sheet materials like plywood or MDF. Additionally, a cheaper table saw might not have enough capacity to rip large sheets, and this is when a circular saw may come in handy.
Can you use a cordless jigsaw outdoors?
You can opt for a cordless jigsaw if you work outdoors where there’s no power outlet.
