Full Answer
Which is the best bench vise to buy?
View the Best Bench Vise, Below. 1 1. TEKTON 54006 6-Inch Swivel Bench Vise. 2 2. Wilton Tools 550P Multi-Purpose Bench Vise. 3 3. Yost LV-4 Home Vise. 4 4. Olympia Tools Bench Vise 38-606. 5 5. WEN 454BV 4-Inch Heavy Duty Cast Iron Bench Vise. More items
Where are benchcrafted vises made?
They're a small, family company with just a handful of employees and plan to keep it that way. Benchcrafted workbench vises are made in Cedar Rapids, Iowa, using domestic sourced components. Since 1979 Conquest Industries has manufactured quality industrial equipment, tools and supplies for the metals and wood products industry.
What is a swiveling bench vise?
This bench vise secures to a benchtop with three bolts, and the swiveling base allows users to reposition metal pipes and bars, wood boards, and other items for easy and convenient access. And, swiveling will give the user access to the large anvil surface that is mounted directly over the swivel for maximum flexibility.
Is forward a good vise?
The Forward 5" vise is a high quality, well finished, heavy duty bench vise. I'm pleased. One last comment - to mount the vise, I employed 1/2" bolts but used 7/16" washers - on the top of vise. 1/2" washers were too large in width to fit on the top side of vise.
Who made the best bench vise?
Top 10 Bench Vise 2022Bench ViseJaw WidthWarrantyYost LV-4 Home Vise4 ½ inch1 yearHFS Heavy Duty Bench Vise4 inch1 yearIRWIN Tools Multi-Purpose Bench Vise5 inchLifetime warrantyWilton Wilton Bench Vise6 inchLifetime warranty6 more rows•Jan 10, 2022
What is the best bench vice?
DIYers who do a lot of plumbing or metal fabrication and need a top-notch bench vise to get the job done should consider the Wilton WS8 8-inch shop vise. This 30,000-psi cast-iron vise features 8-inch replaceable jaws, a jaw opening of up to 8 inches wide, and a throat depth of 4 inches.
Are Yost vises made in China?
Any 865 or 880 vise are now made in China. Be careful when ordering. You order the made in USA vise and if it is shipped from Yost, it will now be a 865-D2 made in China.
Are Irwin vise any good?
The Bottom Line. The Irwin Multi-Purpose Vise is very attractive for about $95 as long as you keep in mind its light-duty design intent. It's a great fit for a DIYer's shop or garage and has some potential for Pros that don't need 2 tons or more (literally) of clamping force.
Are clamp on vises good?
As such, clamp-on vises are typically most useful for light duty operations. That's not to say that they can't take some abuse and some torque, but the upper limit just isn't as high as a traditional vise.
Are Wilton tools Made in USA?
Wilton Tools has a variety of tools, they best known for rugged and dependable Vises & Clamps which are “Proudly made in the USA”. Their Combination Pipe and Bench Vise has a round channel that is designed to handle the most demanding clamping applications.
Where are Joplin vices made?
Joplin quick release. Vice, Joplin 3". Made in Australia. Joplin is a Sidchrome company.
What should I look for in a bench vice?
While selecting a bench vise, you have to check its throat depth – this is the distance from the top side of the jaw to the top of the slide below the jaw. Larger throat depths mean you can hold larger workpieces. Bench vises have varying jaw widths. For larger objects, you need bench vises that have bigger jaw widths.
Are Wilton vises still made in the USA?
Be aware that Wilton produces these in Tawian now under model Number 28806 1755, the 28806 models are overseas made (not China but Tawain). Tawain tools produced for sale in the US seem to have better quality than their Chinese counterparts. The 63200/1755 models are USA made.
Where are Milwaukee vises made?
Milwaukee USANote: The vise is made in its entirety in Milwaukee USA. The hardware kit is not.
Are Olympia vises Made in USA?
NOT MADE IN USA.
What is best vise for woodworking?
5 Best Woodworking Vises (2021 Review)Yost M9WW Rapid Acting 9” Woodworking Vise.TEKTON 53986 6 ½” Woodworking Vise.Eclipse Quick Release 10” Woodworking Vise.IRWIN 226361 6 ½” Woodworking Vise.Shop Fox D4328 9” Quick Release Wood Vise.
What should I look for in a bench vice?
While selecting a bench vise, you have to check its throat depth – this is the distance from the top side of the jaw to the top of the slide below the jaw. Larger throat depths mean you can hold larger workpieces. Bench vises have varying jaw widths. For larger objects, you need bench vises that have bigger jaw widths.
Where are Wilton vises made?
The new Wilton Tradesman vises are made in Taiwan, and will be replacing current SKUs. The new Mechanics Pro vises, which have lower price points, feature an enclosed spindle, precision machined slide, a needle roller thrust bearing design, and 360° swivel base.
Which vice should I get?
For general household DIY, a 4- to 5-inch vise is large enough to handle most tasks. (This measurement is the length of the jaws from end to end and is maximum amount of contact your vise has with the workpiece.)
How does a bench vise work?
A bench vise is an integral tool and a common mechanical device used to hold workpiece stationary. It is used mostly in metalworking and woodworkin...
What are the main parts of a bench vise?
The integral parts of a bench vise include the static jaw, the moving jaw, the handle and the slide. Some vise models feature additional elements s...
How important is a swivel base?
When it comes to working versatility, the bench vise is an essential unit needed in any shop or garage for the sanding or cutting of wood or metal.
What is a bench vise?
A staple in metalworking, automotive work, woodworking, and hobbyist shops, a bench vise is a metal clamping device that bolts to the top, side, or underside of your workbench.
What is a Wilton bench vise?
The Wilton bench vise can help most DIYers clamp down and hold on to materials with its sturdy build and 360-degree swivel base. Hobbyists who need a little less swivel and bulk might start with the basic, affordable TEKTON bench vise.
What is a vise for woodworking?
This vise mounts to the front of your woodworking bench with lag screws (sold separately). It has two additional holes on each jaw for securing sacrificial wood jaw inserts (blocks of wood that clamp against the workpiece to avoid the metal jaws marring expensive hardwoods). There’s also a slide-up steel dog in the outer jaw, allowing you to clamp your workpiece against a bench dog for surface planing and flattening. Plus, the orange enamel finish is baked on for extra durability.
How do benchtop vises work?
Benchtop vises mount directly to your benchtop surface. They usually mount with four bolts that sandwich the vise’s base against the benchtop. It’s a good idea to mount a benchtop vise directly over a table leg. The leg will create a solid surface to hammer over, while the unsupported center of a bench may be overly bouncy and absorb a lot of your striking power.
How wide is a cast iron shop vise?
This 30,000 PSI cast iron vise features 8-inch replaceable jaws, a jaw opening of up to 8 inches wide, and a throat depth of 4 inches. It can also clamp pipes as small as 3/4-inch in diameter and up to 3 inches—more than 1/4-inch larger than other models—to provide more capability than most other bench vises.
How wide is a bench vise?
For a medium-duty, no-frills bench vise, this one is worth checking into. It is a 30,000 PSI steel vise with 6-inch wide serrated replaceable jaws and a jaw opening of up to 6 inches, covering most DIY and home workshop needs.
Where do bench vises mount?
Bench vises mount to your workbench, either on top, on the front, or below. They use a screw-function to open and close a set of jaws that clamp your workpiece in place.
Why do we need a bench vise?
A staple of most shops, the bench vise makes things easier and is a safety necessity. It lets you hold a workpiece firmly in place without fear of dropping it or slipping. Saunter into any automotive, woodworking, metalworking, or hobbyist shop, and you’ll encounter a bench vise laying around.
Why use an end vise on a bench?
Not everyone favors the end vise because it’s impractical – the material sticks out from the workben ch.
Why are the jaw openings on a bench vise larger?
The jaw openings on woodworking bench vises are usually larger to create a greater clamping surface space. The wider the surface area, the less likely the pressure will crush or damage the wood’s surface. The greater surface area spreads out the clamping pressure to reduce the likelihood of damage.
How much clamping force does a vise have?
It's also fashioned from powder-coated 36,000 PSI iron for extra strength. This vise offers 2,440 pounds of clamping force. The swivel base also pivots 130 degrees
What is a 6 inch vise?
The TEKTON 6-inch Swivel Bench Vise locks quickly and threads tight for a firm and sturdy holding, enabling you to work faster and with greater self-assurance. This piece is fashioned from 30,000 PSI cast iron and offers maximum durability coupled with dependability. The serrated steel jaws are non-slip. You can use this bench vise to form and shape metal pieces. The vise rotates 120-degrees on its swivel base.
How many degrees does a Wilton bench vise rotate?
Its strong grip is ensured with completely replaceable steel jaws that boast a serrated pattern to guarantee gripping power. The head rotates 360 degrees to let you grip just about anything with ease in any position you need.
What is an Olympia vise?
An iron bench vise, the Olympia has a heavy reinforced 4 lug base for optimum strength. The anvil and anvil horn are polished to make shaping an easy, worry-free process. The vise has permanent pipe jaws and replaceable hardened jaws. The spindle and hand are machined for extra strength.
Where is the Wilton bench vise made?
The size is 8.7 x 9.7 inches, and the weight is only 5.4 pounds. The bench vise is made in the United States and comes with 2 years warranty. The company is located at Wilton Avenue in Chicago. The last thing we will reveal is the U channel that is used to adjust the bench vise when needed. It is sturdy and can withstand years of all usages you can think of. We believe that you will appreciate the toughness and the affordable price.
When were vises invented?
The first vises appeared in the mid-1700, but we believe that they have been with us since the beginning of time. Those early models were made from wood, and they were controlled using hammers and wedges. As you may assume, they were complicated to manage, and they weren’t convenient.
What is a tekton bench vise?
The TEKTON 8-Inch Swivel Bench Vise | 5409 is a bit more complicated model of bench vises that does require your attention. It is made from steel rather than from iron, and the 60.000 PSI steel was used. The maximum clamping force is 8800 pounds, and the jaws can be rotated by 360 degrees. The bench vise is easy to adjust and use and also very simple when it comes to fitting it to a workbench. We also liked the non-slip inserts to the jaws that will hold any metal or wood in place at all times. It is a bench vise that is suitable for beginners but also for professionals.
How much clamping force is needed for a vise?
Clamping force is precise as its sounds, how strong a vise can hold the material in the jaws. We must explain that the average result is 2000 pounds. It is the most common and the most needed at the moment. Anything below that is below average and should be considered if you will use a vise for wood or similar materials. Anything higher than 2000 pounds is above average, and we are looking at bench vises designed for massive metal sheets, long pipes, or pieces of wood. Most of you will be entirely satisfied with the average clamping force.
What size is a forward CR60A?
Forward CR60A 6.5-Inch Bench Vise Swivel Base Heavy Duty with Anvil is an exciting alternative. First and foremost, the vise comes in three different sizes. You can have 6.25, 5.5, and 4.5 inches. We tested all versions, and they are the same except the apparent difference. An interesting fact is that the smallest version is the most expensive, but the difference isn’t significant. The vise comes made from 30.000 PSI cast iron and offers two jaws. One for flat surfaces and another for pipes.
What is the clamping force of a forward 0804?
It is made from ductile cast iron, 30.000 PSI, and a clamping force is 9.000 PSI. As you can see, it is similar to the first model on our list. The vise comes with 10 years warranty and excellent customer support.
What is a wise vise?
The model we have here is simply an excellent product. It is made from solid steel, and the weight is 63 pounds, which is higher than average. The vise has three separate jaws, and it can be used for wood, metal pieces, and even pipes. The next best thing is the fact the jaws can rotate by 360 degrees, and you can adjust the vise to suit your specific need at that very moment. The wise is made from ductile iron (60.000PSI), and it is the main reason why it is so bulky. We liked this advantage. It makes the product more stable and more usable.
Where are Benchcrafted vises made?
They're a small, family company with just a handful of employees and plan to keep it that way. Benchcrafted workbench vises are made in Cedar Rapids, Iowa, using domestic sourced components.
Where are CNC vises made?
All their CNC vises are made in Placentia, California using 100% domestic materials & components.
What is a vise machine?
An American manufacturer of premium single and dual station CNC machine vises, machinable quick-change soft jaws, and quick-change fixturing solutions. Since they started in 2012 they have been committed to continually create innovative products and proving that American ingenuity can not only compete, but raise the bar of performance, quality, and value in the modern global marketplace for industrial tooling.
Where are Wilton bullet vises made?
Select models of Wilton bullet vises are made in Carpentersville, Illinois, using domestic sourced components.
Who makes Hovarter vises?
Lenco Tools LLC is the manufacturer of the Hovarter Custom Vise line of quick action woodworking vises. This unique and patented mechanism may be used to create leg vises, face vises or wagon vises.
How many CNC machines are there in Conquest Industries?
Housed in a 43,000 square foot building with a machine park of 11 CNC machines, (Milling and Turning), three grinding centers and a compliment of manual machines producing the majority of the parts for the machines they offer.
What is a compact vise?
This compact vise is the perfect size for holding smaller items like keys, acrylic pieces, or compact craft objects. The nylon-covered jaws are also well-suited for more delicate items, and are less likely to dent or mar your work piece.
Where do you mount a vise?
This type of vise typically mounts to the front, or end of your workbench, as opposed to the top like most of our other options. We’ve found that this allows you to more easily maneuver around your work piece, and makes them much more convenient for woodworking. This vise also features wide jaw plates, which give you more surface area to clamp long pieces of wood in place. Pre-drilled holes in the jaws allow you to mount wood faces to them, which help reduce the chances of wooden workpieces being dented by the metal jaws.
What color hammer to use with vise?
This four-pound hammer will pair perfectly with this vise’s anvil surface, and is designed with an anti-vibration neck for comfortable striking. This bright green color of both the hammer and vise are a nice perk, and help them stand out in a busy workshop.
How many degrees can a Wilton swivel base rotate?
The swiveling base can rotate 360 degrees, and features two pivot locks so you can secure it in whatever position you prefer. It includes a good-sized anvil surface, and just like our other Wilton picks, this model comes with a lifetime warranty.
Is the Olympia bench vise good?
This Olympia model could be a great choice if you don’t have the budget for a higher-end option, but still want the clamping power and convenience of a bench vise.
Can you swivel a vise?
You can also swivel it to whatever position you prefer, which can come in handy when you really need to focus on precision crafting tasks. If you’d prefer to use this as a temporary vise, you can forgo the bolts and simply clamp it to your workbench. We especially appreciate the anvil surface, a nice perk not usually found on vises this small.
